Parameters |
Factory Lead Time |
1 Week |
Contact Plating |
Tin |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
5-TSSOP, SC-70-5, SOT-353 |
Number of Pins |
5 |
Operating Temperature |
-40°C~125°C |
Packaging |
Tape & Reel (TR) |
Published |
2013 |
Series |
74CBTLV |
JESD-609 Code |
e3 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
5 |
Type |
Bus Switch |
Resistance |
11Ohm |
Technology |
CMOS |
Voltage - Supply |
2.3V~3.6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
2.7V |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
74CBTLV1G125 |
Pin Count |
5 |
Number of Elements |
1 |
Circuit |
1 x 1:1 |
Supply Voltage-Max (Vsup) |
3.6V |
Supply Voltage-Min (Vsup) |
2.3V |
Number of Ports |
2 |
Number of Bits |
1 |
Propagation Delay |
6.3 ns |
Quiescent Current |
200μA |
Turn On Delay Time |
6.3 ns |
Family |
CBTLV/3B |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Output Polarity |
TRUE |
High Level Output Current |
-128mA |
Low Level Output Current |
128mA |
Voltage Supply Source |
Single Supply |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
74CBTLV1G125GW,125 Overview
Due to the lack of space on the board, digital switch is provided in the 5-TSSOP, SC-70-5, SOT-353.As a result, it is packaged in the way of Tape & Reel (TR).digital switch ic uses the method of Surface Mount for mounting.The multiplexers uses an analog IC Bus Switch as the analog part of the circuit.By keeping the operating temperature at -40°C~125°C, turn signal switch will not be affected by external factors.Using a 2.3V~3.6V supply voltage provides digital controlled switch's superior flexibility for designers.The multiplexers can be used for a wide range of applications since they are members of 74CBTLV series.This configuration includes 5 terminations as part of its basic functionality.In addition, it also has a base part number of 74CBTLV1G125, which can be used to find related parts.The multiplexer's system is supplied with a voltage of 2.7V.Signal switch has 5 component pins.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.This supply type employs Single.The board is configured with 5 pins.The mounting point is Surface Mount.In the CBTLV/3B family, the logic switch is included.As a result, signal multiplexer provides 1 bits.Keeping the minimum supply voltage (Vsup) at 2.3V prevents some unnecessary failures.It is advisable to keep the maximum supply voltage (Vsup) at 3.6V so as to avoid some unnecessary failures.Without external influences, it consumes 200μA current of multiplexer ic.The system operates with a resistance of 2.The resistance of the signal switching is 11Ohm.This mux switch configuration has 1 elements.
74CBTLV1G125GW,125 Features
Supplied in the 5-TSSOP, SC-70-5, SOT-353 package
Adopting a supply type of Single
74CBTLV1G125GW,125 Applications
There are a lot of Nexperia USA Inc. 74CBTLV1G125GW,125 Signal Switches / Multiplexers / Decoders applications.
- Memory system of computers
- Automatic Monitoring systems
- Combinational circuit
- HDMI applications
- Code conversion
- Time division multiplexing system
- Automatic health monitoring systems
- Enabling block of memory depending on address in memory chips
- Make full adder
- Seven segment displays