Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 5 days ago) |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-SSOP (0.154, 3.90mm Width) |
Number of Pins |
16 |
Weight |
74.502547mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Series |
74CBTLV |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
2 (1 Year) |
Number of Terminations |
16 |
Type |
Bus Switch |
Resistance |
7Ohm |
Subcategory |
Bus Driver/Transceivers |
Packing Method |
TR |
Technology |
CMOS |
Voltage - Supply |
2.3V~3.6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
2.5V |
Base Part Number |
74CBTLV3125 |
Pin Count |
16 |
Operating Supply Voltage |
3.3V |
Circuit |
1 x 1:1 |
Supply Voltage-Max (Vsup) |
3.6V |
Supply Voltage-Min (Vsup) |
2.3V |
Number of Channels |
4 |
Load Capacitance |
50pF |
Number of Ports |
2 |
Nominal Supply Current |
10μA |
Output Current |
64mA |
Number of Bits |
1 |
Propagation Delay |
250 ps |
Quiescent Current |
10μA |
Turn On Delay Time |
4.6 ns |
Family |
CBTLV/3B |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Bandwidth |
200MHz |
Output Polarity |
TRUE |
High Level Output Current |
-128mA |
Low Level Output Current |
128mA |
Power Supply Current-Max (ICC) |
0.01mA |
Voltage Supply Source |
Single Supply |
Count Direction |
BIDIRECTIONAL |
Height |
1.75mm |
Length |
4.9mm |
Width |
3.9mm |
Thickness |
1.5mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
74CBTLV3125DBQRG4 Overview
Digital switch is provided in the 16-SSOP (0.154, 3.90mm Width) for the purpose of saving board space.It is packaged according to the Tape & Reel (TR) method.In terms of mounting, digital switch ic uses the Surface Mount method .the multiplexers uses an analog IC Bus Switch.When the operating temperature is kept at -40°C~85°C, turn signal switch will not be susceptible to external factors.Using a 2.3V~3.6V supply voltage provides digital controlled switch's superior flexibility for designers.Since they are members of the 74CBTLV series, they can be used in a wide variety of applications.Among its basic configurations are 16 terminations.There is a base part number of 74CBTLV3125 which can also be used in order to locate the logic switch that are related to this item.The turn signal switch is supplied with a voltage of 2.5V volts.In this turn signal switch, there are 16 components that can be connected to each pin.At the end of a conductor, it uses GULL WING as the point where the conductor ends.Single is employed as its supply type.Currently, it is configured with 16 pins.The multiplexer ic is mounted in the direction of Surface Mount.In the CBTLV/3B family, the logic switch is included.As a result, signal multiplexer provides a total of 1 bits.It is recommended that the minimum supply voltage (Vsup) be kept at 2.3V so that unnecessary failures can be prevented.It is advisable to keep the maximum supply voltage (Vsup) at 3.6V in order to prevent some unnecessary failures.The digital switch ic is a part of an electronic system classified as Bus Driver/Transceivers.It consumes 10μA current of multiplexer ic since it is not affected by external factors.It is possible to achieve reliable performance of the multiplexers with a voltage supply of 3.3V.In accordance with TR, switches can be packaged.The resistance is 2.7Ohm is the resistance at which it operates.The turn signal switch's circuit consists of 4 channels that are being used for transmission in the circuit.There is an output current of 64mA that allows for greater switches' flexibility.
74CBTLV3125DBQRG4 Features
Supplied in the 16-SSOP (0.154, 3.90mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 3.3V
74CBTLV3125DBQRG4 Applications
There are a lot of Texas Instruments 74CBTLV3125DBQRG4 Signal Switches / Multiplexers / Decoders applications.
- Analog, digital or video signal switching
- Metal detectors
- Data distribution
- D/A converters
- CNC machines
- To select different task for memory in microprocessor memory systems
- HD surveillance system
- Data communication
- Computer memory
- Medical industry