74CBTLV3125DS,118
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | 74CBTLV |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Bus Switch |
| Resistance | 60Ohm |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 4 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.635mm |
| Base Part Number | 74CBTLV3125 |
| Pin Count | 16 |
| Number of Elements | 4 |
| Circuit | 1 x 1:1 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 2.3V |
| Number of Ports | 2 |
| Nominal Supply Current | 100mA |
| Number of Bits | 1 |
| Propagation Delay | 6 ns |
| Quiescent Current | 50μA |
| Turn On Delay Time | 6 ns |
| Family | CBTLV/3B |
| Supply Type | Single |
| Turn-Off Delay Time | 5.5 ns |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Height Seated (Max) | 1.73mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74CBTLV3125DS,118 Overview
This is a relatively small item of digital switch that is included in the 16-SSOP (0.154, 3.90mm Width) in order to save space on the board.As a result, it is packaged in the way of Tape & Reel (TR).Mounting is performed using Surface Mount.In the multiplexers, the analog IC is indicated by Bus Switch.When the operating temperature is kept at -40°C~125°C, turn signal switch will not be susceptible to external factors.When operated with a 2.3V~3.6V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.With the 74CBTLV series, the multiplexers are suitable for a diverse range of applications.Among its basic features are 16 terminations.The base part number is 74CBTLV3125, so you can find its logic switch related parts using that number.The multiplexer's system works with 2.7V voltage.A component pin count of 16 can be found on this turn signal switch.Conductors terminate at GULL WING in this design.Its supply type is Single, which is used as the source of power.A configuration of 16 pins is used.Surface Mount is the way it is mounted.The logic switch is a member of the CBTLV/3B family.As a result, signal multiplexer provides a total of 1 bits.Avoid unnecessary failures by keeping the supply voltage (Vsup) at 2.3V.Vsup (maximum supply voltage) should be kept as 3.6V to prevent unnecessary failures.No external influence consumes 50μA current of multiplexer ic.A resistance of 2 is used to operate the signal switching.This signal switching operates at a resistance of 60Ohm.There are 4 elements used for the mux switch configuration.
74CBTLV3125DS,118 Features
Supplied in the 16-SSOP (0.154, 3.90mm Width) package
Adopting a supply type of Single
74CBTLV3125DS,118 Applications
There are a lot of Nexperia USA Inc. 74CBTLV3125DS,118 Signal Switches / Multiplexers / Decoders applications.
- Enabling different rows of memory depending on address in memory chips
- Data-routing applications
- Solenoid cooling fan
- Transmission from the computer system of a satellite
- Paper plants
- Data demultiplexing
- Seven segment displays
- Make full adder
- Data collection system
- Steel plants
