74CBTLV3125NSRG4
| Parameters | |
|---|---|
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 14 |
| Weight | 208.312296mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CBTLV |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | Bus Switch |
| Resistance | 7Ohm |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74CBTLV3125 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Circuit | 1 x 1:1 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 2.5/3.3V |
| Supply Voltage-Min (Vsup) | 2.3V |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 4 |
| Propagation Delay | 250 ps |
| Family | CBTLV/3B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 4 |
| Height Seated (Max) | 2mm |
| Length | 10.2mm |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
74CBTLV3125NSRG4 Overview
Digital switch is provided in the 16-SOIC (0.209, 5.30mm Width) for the purpose of saving board space.The package is packaged in accordance with Tape & Reel (TR).In terms of mounting, digital switch ic uses the method of Surface Mount.The multiplexers uses an analog IC Bus Switch as the analog part of the circuit.When the operating temperature is kept at -40°C~85°C, turn signal switch will not be susceptible to external factors.Design engineers have more flexibility when digital controlled switch operates at 2.3V~3.6V voltage.The multiplexers from 74CBTLV series can be used for a wide range of applications.It is designed with 14 terminations as part of its basic configuration.To find signal switch's related components, a base part number of 74CBTLV3125 may also be used.The multiplexer's system is powered by 2.5V voltage.A component pin count of 14 is found on this turn signal switch.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.Single is used as its supply type.Currently, it is configured with a 14 pin configuration.The multiplexer ic is mounted in the direction of Surface Mount.I would like to refer to the logic switch as a member of the CBTLV/3B family.Signal multiplexer contains 4 bits.To avoid unnecessary failures, keep the supply voltage at 2.3V (Vsup).To avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 3.6V.There is a power supply provided for the mux switch's normal operation of 2.5/3.3V.The digital switch ic is an electronic part classified into Bus Driver/Transceivers.With a resistance of 0, it operates.A resistance of 7Ohm is used to operate the signal switching.For higher switches' flexibility, 64mA is provided as an output current.
74CBTLV3125NSRG4 Features
Supplied in the 16-SOIC (0.209, 5.30mm Width) package
Adopting a supply type of Single
Power supplies of 2.5/3.3V
74CBTLV3125NSRG4 Applications
There are a lot of Texas Instruments 74CBTLV3125NSRG4 Signal Switches / Multiplexers / Decoders applications.
- Frequency multiplexing system
- Used to connect a single source to multiple destinations
- Make full adder
- Image transmission
- Automatic health monitoring systems
- Electronics industry
- Paper plants
- High-performance memory-decoding applications
- A robotic vehicle with the metal detector
- Textile mills
