74CBTLV3125PGG
| Parameters | |
|---|---|
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 14 |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Resistance | 40Ohm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 14 |
| Number of Elements | 4 |
| Power Supplies | 2.5/3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.3V |
| Number of Ports | 2 |
| Nominal Supply Current | 10μA |
| Number of Bits | 4 |
| Propagation Delay | 250 ps |
| Quiescent Current | 10μA |
| Turn On Delay Time | 4.6 ns |
| Family | CBTLV/3B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Height Seated (Max) | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
74CBTLV3125PGG Overview
Providing this information in the TSSOP enables digital switch board space to be saved.As part of its basic configuration, 14 terminations are designed as a part of it.For multiplexer's system, 2.5V voltage is supplied.A component pin count of 14 is found on this turn signal switch.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.There is a type of supply Single that is employed in this case.Currently, it is configured with a 14 pin configuration.The mounting point is Surface Mount.There is a family of CBTLV/3B members.The multiplexer ic provides 4 bits.The power supply of 2.5/3.3V is provided for mux switch's normal operation.I would classify the digital switch ic as an electronic part belonging to the Bus Driver/Transceivers category.Without external influences, it consumes 10μA current of multiplexer ic.The signal switching operates with a resistance of 2.The system operates with a resistance of 40Ohm.The signal switch can operate at a maximum temperature of 85°C.A temperature of the multiplexer of -40°C should be maintained for minimal operation.The relevant device specification specifies a maximum supply voltage of 3.6V for the signal switches.A minimum supply voltage of 2.3V is specified for the digital swith by its applicable specification.It contains 4 elements in mux switch configuration.A logic IC based on BUS DRIVER is employed in this system.
74CBTLV3125PGG Features
Supplied in the TSSOP package
Adopting a supply type of Single
Power supplies of 2.5/3.3V
BUS DRIVER as the logic IC
74CBTLV3125PGG Applications
There are a lot of Integrated Device Technology (IDT) 74CBTLV3125PGG Signal Switches / Multiplexers / Decoders applications.
- Metal detectors
- PCIe
- Frequency multiplexing system
- Speed synchronization of multiple motors in industries
- Data bus control
- Logic gates for other digital devices
- Data distribution
- Solenoid cooling fan
- Automatic health monitoring systems
- To select different task for memory in microprocessor memory systems
