74CBTLV3125PW,118
| Parameters | |
|---|---|
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | Bus Switch |
| Resistance | 60Ohm |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 4 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74CBTLV3125 |
| Pin Count | 14 |
| Circuit | 1 x 1:1 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 2.3V |
| Number of Channels | 4 |
| Number of Ports | 2 |
| Nominal Supply Current | 100mA |
| Number of Bits | 1 |
| Propagation Delay | 6 ns |
| Quiescent Current | 50μA |
| Turn On Delay Time | 6 ns |
| Family | CBTLV/3B |
| Supply Type | Single |
| Turn-Off Delay Time | 5.5 ns |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Height Seated (Max) | 1.1mm |
| Length | 5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | 74CBTLV |
| JESD-609 Code | e4 |
74CBTLV3125PW,118 Overview
Due to the fact that it is provided in the 14-TSSOP (0.173, 4.40mm Width), digital switch allows the board to be compacted.In this case, it is packaged as Tape & Reel (TR).The mounting method digital switch ic uses is Surface Mount.The analog IC used in the multiplexers can be referred to as Bus Switch.By maintaining the operating temperature at -40°C~125°C, turn signal switch will not be affected by external factors.When digital controlled switch operates at 2.3V~3.6V, designers have superior flexibility.These multiplexers are members of the 74CBTLV series, which provide extensive application potential.Among its basic configurations are 14 terminations.The part number for 74CBTLV3125 can be used to find its logic switch related parts as well.In multiplexer's system, 2.7V is the voltage supplied.Currently, this turn signal switch has a total of 14 component pins.GULL WING is used as the point at which the conductors come to an end as part of this formula.There is a supply type of Single employed as part of this supply.A total of 14 pins are configured on this board.The mounting is in the way of Surface Mount.The logic switch is a member of the CBTLV/3B family.In this signal multiplexer, there are 1 bits provided.Vsup should be kept at 2.3V to prevent some unnecessary failures.Keeping Vsup at 3.6V will prevent some unnecessary failures.There are no external influences on this multiplexer ic, so it consumes 50μA current.A resistance of 2 governs its operation.The system operates with a resistance of 60Ohm.The turn signal switch's circuit consists of 4 channels that are being used for transmission in the circuit.
74CBTLV3125PW,118 Features
Supplied in the 14-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
74CBTLV3125PW,118 Applications
There are a lot of Nexperia USA Inc. 74CBTLV3125PW,118 Signal Switches / Multiplexers / Decoders applications.
- Communication system
- Speed synchronization of multiple motors in industries
- Data bus control
- Electronic circuits
- Small scale TV wall
- Enabling different rows of memory depending on address in memory chips
- Frequency multiplexing system
- Encrypted communications system
- Code converters
- Control unit of Central Processing unit (CPU)
