74CBTLV3125PWRG4

14 Terminations2.3V~3.6V 14 Pin 74CBTLV3125 Signal switch74CBTLV Series 1 Functions

Manufacturer: Texas Instruments
Nocochips NO: 815-74CBTLV3125PWRG4
Package: 14-TSSOP (0.173, 4.40mm Width)
Datasheet: -
Stock: 169
Description: 14 Terminations2.3V~3.6V 14 Pin 74CBTLV3125 Signal switch74CBTLV Series 1 Functions(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 day ago)
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	14-TSSOP (0.173, 4.40mm Width)
Number of Pins	14
Weight	57.209338mg
Operating Temperature	-40°C~85°C
Packaging	Tape & Reel (TR)
Series	74CBTLV
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
ECCN Code	EAR99
Type	Bus Switch
Resistance	7Ohm
Subcategory	Bus Driver/Transceivers
Packing Method	TR
Technology	CMOS
Voltage - Supply	2.3V~3.6V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	2.5V
Base Part Number	74CBTLV3125
Pin Count	14
Operating Supply Voltage	3.3V
Circuit	1 x 1:1
Supply Voltage-Max (Vsup)	3.6V
Supply Voltage-Min (Vsup)	2.3V
Number of Channels	4
Load Capacitance	50pF
Number of Ports	2
Nominal Supply Current	10μA
Output Current	64mA
Number of Bits	4
Propagation Delay	250 ps
Quiescent Current	10μA
Turn On Delay Time	4.6 ns
Family	CBTLV/3B
Output Characteristics	3-STATE
Supply Type	Single
Bandwidth	200MHz
Output Polarity	TRUE
High Level Output Current	-128mA
Low Level Output Current	128mA
Power Supply Current-Max (ICC)	0.01mA
Voltage Supply Source	Single Supply
Count Direction	BIDIRECTIONAL
Height	1.2mm
Length	5mm
Width	4.4mm
Thickness	1mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

74CBTLV3125PWRG4 Overview

Due to the fact that it is provided in the 14-TSSOP (0.173, 4.40mm Width), digital switch allows the board to be compacted.The package is packaged in accordance with Tape & Reel (TR).Digital switch ic adheres to a mounting method of Surface Mount.As the analog part, the circuit uses an analog IC Bus Switch.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at -40°C~85°C.The turn signal switch is designed for use with a 2.3V~3.6V supply voltage, which gives it a lot of flexibility.As a member of 74CBTLV series, the multiplexers can be used for a wide range of applications.There is a design for terminating 14 as part of its basic configuration.To find signal switch's related components, a base part number of 74CBTLV3125 may also be used.The multiplexer's system is supplied with a voltage of 2.5V.There are 14 component pins in this turn signal switch.GULL WING represents the end of conductors.Its supply type is Single, which is used as the source of power.A total of 14 pins are configured on this board.The mounting point is Surface Mount.The CBTLV/3B family includes the logic switch.There are 4 bits in signal multiplexer.It is recommended that the minimum supply voltage (Vsup) be kept at 2.3V to avoid some unnecessary failures.Keeping Vsup at 3.6V will prevent some unnecessary failures.Bus Driver/Transceivers is the classification for this the digital switch ic.There are no external influences on this multiplexer ic, so it consumes 10μA current.Supply voltages of 3.3V can provide reliable performance of the multiplexers.A TR packaging method is used in the switches.A resistance of 2 is used to operate the signal switching.This signal switching operates at a resistance of 7Ohm.For transmission, there are 4 channels in the turn signal switch's circuit.It is possible to provide a current output of 64mA for greater switches' flexibility.