74CBTLV3125QG
| Parameters | |
|---|---|
| Pin Count | 16 |
| Number of Elements | 4 |
| Power Supplies | 2.5/3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.3V |
| Number of Ports | 2 |
| Number of Bits | 4 |
| Propagation Delay | 4.6 ns |
| Quiescent Current | 10μA |
| Turn On Delay Time | 4.6 ns |
| Family | CBTLV/3B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Height Seated (Max) | 1.72mm |
| Length | 4.9mm |
| Width | 3.8mm |
| Thickness | 1.47mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | QSOP |
| Number of Pins | 16 |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.635mm |
74CBTLV3125QG Overview
Due to the fact that it is provided in the QSOP, digital switch allows the board to be compacted.There are 16 terminations included in its basic configuration.In this case, 2.5V is the voltage supplied to the multiplexer's system.In this turn signal switch, there are 16 component pins.GULL WING represents the end of conductors.This supply type employs Single.This multiplexer ic has 16 pins configured.Multiplexer ics are mounted in the direction of Surface Mount.I would like to refer to the logic switch as a member of the CBTLV/3B family.The multiplexer ic provides 4 bits.It is provided that 2.5/3.3V has a power supply in order to function normally.The part belongs to the Bus Driver/Transceivers category of signal switches.Not being affected by the external factors, consumes 10μA current of multiplexer ic.The resistance of the signal switching is 2.At 85°C, the maximum operating temperature of this signal switch is acceptable.It is recommended that the minimum operating temperature of the multiplexer be kept at -40°C.In compliance with the applicable device specification, the signal switches has a maximum supply voltage of 3.6V.Device specifications require that the digital swith operate at a minimum supply voltage of 2.3V.The configuration of the mux switch contains 4 elements.A logic IC based on BUS DRIVER is employed in this system.
74CBTLV3125QG Features
Supplied in the QSOP package
Adopting a supply type of Single
Power supplies of 2.5/3.3V
BUS DRIVER as the logic IC
74CBTLV3125QG Applications
There are a lot of Integrated Device Technology (IDT) 74CBTLV3125QG Signal Switches / Multiplexers / Decoders applications.
- Memory system of computers
- Control unit of Central Processing unit (CPU)
- Transmission from the computer system of a satellite
- Recording transmission
- Signal router
- Data communication
- Electronics industry
- Robotic vehicles
- Memory chips
- Data distribution
