74CBTLV3126PW-Q10J
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| Series | 74CBTLV |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | Bus Switch |
| Resistance | 8.4Ohm |
| Technology | CMOS |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 4 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74CBTLV3126 |
| Pin Count | 14 |
| Number of Elements | 4 |
| Circuit | 1 x 1:1 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 2.3V |
| Number of Ports | 2 |
| Number of Bits | 1 |
| Propagation Delay | 6.5 ns |
| Quiescent Current | 50μA |
| Turn On Delay Time | 6.5 ns |
| Family | CBTLV/3B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| Screening Level | AEC-Q100 |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Height Seated (Max) | 1.1mm |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74CBTLV3126PW-Q10J Overview
Due to the fact that it is provided in the 14-TSSOP (0.173, 4.40mm Width), digital switch allows the board to be compacted.The package is packaged in accordance with Tape & Reel (TR).Mounting is performed using Surface Mount.A digital IC Bus Switch is used as the analog component of the multiplexers.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~125°C.When operated with a 2.3V~3.6V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.In addition to being a member of the 74CBTLV series, these multiplexers have a wide range of applications.The basic configuration of this system includes 14 terminations.The base part number is 74CBTLV3126, so you can find its logic switch related parts using that number.The voltage supplied for multiplexer's system is 3.3V.multiplexer's systemCurrently, this turn signal switch has a total of 14 component pins.As the end of conductors, it uses GULL WING.As a type of supply, Single is employed.It is configured with 14 pins.Surface Mount is the way it is mounted.In the CBTLV/3B family, the logic switch is included.Signal multiplexer provides 1 bits.Keeping Vsup at 2.3V will prevent some unwanted failures.To avoid some unnecessary failures, the maximum supply voltage (Vsup) should be kept at 3.6V.It consumes 50μA current of multiplexer ic without external influences.A resistance of 2 is used to operate the signal switching.In terms of resistance, it has a value of 8.4Ohm.It contains 4 elements in mux switch configuration.
74CBTLV3126PW-Q10J Features
Supplied in the 14-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
74CBTLV3126PW-Q10J Applications
There are a lot of Nexperia USA Inc. 74CBTLV3126PW-Q10J Signal Switches / Multiplexers / Decoders applications.
- Automation system
- Microprocessor memory systems
- Injectors
- Data distribution
- A/D converters
- War field flying robot with a night vision flying camera
- Communication system
- Data communication
- Computer memory
- Data collection system
