74CBTLV3126PW,118
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | 74CBTLV |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | Bus Switch |
| Resistance | 60Ohm |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 4 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74CBTLV3126 |
| Pin Count | 14 |
| Circuit | 1 x 1:1 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 2.3V |
| Number of Channels | 4 |
| Number of Ports | 2 |
| Nominal Supply Current | 100mA |
| Number of Bits | 1 |
| Propagation Delay | 6.5 ns |
| Quiescent Current | 50μA |
| Turn On Delay Time | 6 ns |
| Family | CBTLV/3B |
| Logic Function | Buffer |
| Supply Type | Single |
| Turn-Off Delay Time | 6.5 ns |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Height Seated (Max) | 1.1mm |
| Length | 5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74CBTLV3126PW,118 Overview
This is a relatively small item of digital switch that is included in the 14-TSSOP (0.173, 4.40mm Width) in order to save space on the board.Tape & Reel (TR) is the method used for packaging.In terms of mounting, digital switch ic uses the Surface Mount method .The analog IC in the multiplexers is identified as Bus Switch.By keeping the operating temperature at -40°C~125°C, turn signal switch will not be affected by external factors.With a supply voltage of 2.3V~3.6V, designers have greater flexibility of digital controlled switch.Multiplexers of the 74CBTLV series can be used in a wide range of applications.The basic configuration includes 14 terminations.The base part number is 74CBTLV3126, which can also be used to find its logic switch related parts.The multiplexer's system works with 2.7V voltage.This turn signal switch contains 14 component pins.It employs GULL WING as the point at which conductors come to an end.Single is employed as its supply type.A total of 14 pins are configured on this board.Multiplexer ics are mounted in the direction of Surface Mount.The logic switch is a member of the CBTLV/3B family.In the signal multiplexer, there are 1 bits available.Keeping Vsup at 2.3V will prevent some unwanted failures.To avoid some unnecessary failures, the maximum supply voltage (Vsup) should be kept at 3.6V.It consumes 50μA current of multiplexer ic without external influences.This signal switching operates at a resistance of 2.With a resistance of 60Ohm, it operates.Transmission is carried out over 4 channels in the turn signal switch's circuit.
74CBTLV3126PW,118 Features
Supplied in the 14-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
74CBTLV3126PW,118 Applications
There are a lot of Nexperia USA Inc. 74CBTLV3126PW,118 Signal Switches / Multiplexers / Decoders applications.
- Automatic Monitoring systems
- Transmission from the computer system of a satellite
- Electronically controlled engine system
- Paper plants
- GLAN
- Microprocessor input/output systems
- Analog, digital or video signal switching
- Data demultiplexing
- Recording transmission
- Electronic circuits
