74CBTLV3244PGG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 20 |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 40Ohm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 20 |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.3V |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 5 ns |
| Quiescent Current | 10μA |
| Turn On Delay Time | 4 ns |
| Family | CBTLV/3B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Turn-Off Delay Time | 5 ns |
| Output Polarity | TRUE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Independent Circuits | 2 |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74CBTLV3244PGG Overview
Due to the lack of space on the board, digital switch is provided in the TSSOP.There is a design for terminating 20 as part of its basic configuration.For multiplexer's system, a voltage of 2.5V is supplied.A component pin count of 20 is found on this turn signal switch.As a result, conductors end at GULL WING.Single is used as its supply type.A total of 20 pins are configured on this board.It is positioned in the direction of Surface Mount.The logic switch is included into the family of CBTLV/3B.The multiplexer ic provides 8 bits.In electronic terms, the digital switch ic is classified as Bus Driver/Transceivers.There are no external influences on this multiplexer ic, so it consumes 10μA current.2 is the resistance at which it operates.It operates with a resistance of 40Ohm.It is acceptable for this signal switch to operate at the maximal temperature of 85°C.Maintaining a minimum operating temperature of the multiplexer of -40°C is recommended.According to the applicable device specification, the signal switches operates at a maximum supply voltage of 3.6V.A minimum supply voltage of 2.3V is required to operate the digital swith.As its logic IC, it uses BUS DRIVER.
74CBTLV3244PGG Features
Supplied in the TSSOP package
Adopting a supply type of Single
BUS DRIVER as the logic IC
74CBTLV3244PGG Applications
There are a lot of Integrated Device Technology (IDT) 74CBTLV3244PGG Signal Switches / Multiplexers / Decoders applications.
- Encrypted communications system
- Decimal decoder
- Medium scale TV wall
- Make half adder
- Recording transmission
- Automatic health monitoring systems
- Logic circuits
- Microprocessor input/output systems
- D/A converters
- Transmission from the computer system of a satellite
