74CBTLV3244QG8
| Parameters | |
|---|---|
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.3V |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 5 ns |
| Quiescent Current | 10μA |
| Family | CBTLV/3B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Independent Circuits | 2 |
| Height Seated (Max) | 1.75mm |
| Length | 8.7mm |
| Width | 3.8mm |
| Thickness | 1.47mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | QSOP |
| Number of Pins | 20 |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
74CBTLV3244QG8 Overview
As a means of saving space, digital switch is provided in the QSOP.As parts of its basic configuration, 20 terminations are desgined.The turn signal switch is supplied with a voltage of 2.5V volts.This turn signal switch has 20 component pins.As a result, conductors end at GULL WING.As a type of supply, Single is employed.Currently, it is configured with a 20 pin configuration.It is mounted in the way of Surface Mount.The logic switch is a member of the CBTLV/3B family.Signal multiplexer provides 8 bits.I would classify the digital switch ic as an electronic part belonging to the Bus Driver/Transceivers category.It consumes 10μA current of multiplexer ic without external influences.The resistance of the signal switching is 2.The maximum temperature for this signal switch is 85°C.In order to maintain a minimal operating temperature, the temperature of the multiplexer should be set to -40°C.The relevant device specification specifies a maximum supply voltage of 3.6V for the signal switches.Device specifications require that the digital swith operate at a minimum supply voltage of 2.3V.In terms of logic ICs, it uses BUS DRIVER.
74CBTLV3244QG8 Features
Supplied in the QSOP package
Adopting a supply type of Single
BUS DRIVER as the logic IC
74CBTLV3244QG8 Applications
There are a lot of Integrated Device Technology (IDT) 74CBTLV3244QG8 Signal Switches / Multiplexers / Decoders applications.
- Data transfer
- Make half adder
- Microprocessor memory systems
- Speed synchronization of multiple motors in industries
- Data communication
- Telephone network
- Data demultiplexing
- HDMI applications
- Video transmission
- Frequency multiplexing system
