74CBTLV3245APWRE4

20 Terminations2.3V~3.6V 20 Pin 74CBTLV3245 Signal switch74CBTLV Series 1 Functions

Manufacturer: Texas Instruments
Nocochips NO: 815-74CBTLV3245APWRE4
Package: 20-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 814
Description: 20 Terminations2.3V~3.6V 20 Pin 74CBTLV3245 Signal switch74CBTLV Series 1 Functions(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 3 days ago)
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	20-TSSOP (0.173, 4.40mm Width)
Number of Pins	20
Weight	76.997305mg
Operating Temperature	-40°C~85°C
Packaging	Tape & Reel (TR)
Series	74CBTLV
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	20
Type	Bus Switch
Resistance	7Ohm
Subcategory	Bus Driver/Transceivers
Packing Method	TR
Technology	CMOS
Voltage - Supply	2.3V~3.6V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	2.5V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	74CBTLV3245
Pin Count	20
Qualification Status	Not Qualified
Operating Supply Voltage	3.3V
Circuit	8 x 1:1
Supply Voltage-Max (Vsup)	3.6V
Supply Voltage-Min (Vsup)	2.3V
Load Capacitance	50pF
Number of Ports	2
Nominal Supply Current	20μA
Output Current	64mA
Number of Bits	8
Propagation Delay	250 ps
Quiescent Current	20μA
Turn On Delay Time	6.4 ns
Family	CBTLV/3B
Output Characteristics	3-STATE
Supply Type	Single
Bandwidth	200MHz
Output Polarity	TRUE
Prop. Delay@Nom-Sup	0.25 ns
High Level Output Current	-128mA
Low Level Output Current	128mA
Voltage Supply Source	Single Supply
Independent Circuits	1
Count Direction	BIDIRECTIONAL
Height	1.2mm
Length	6.5mm
Width	4.4mm
Thickness	1mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

74CBTLV3245APWRE4 Overview

As a means of saving space, digital switch is provided in the 20-TSSOP (0.173, 4.40mm Width).Tape & Reel (TR) is the packaging method.As far as mounting is concerned, digital switch ic uses Surface Mount.The analog IC used in the multiplexers can be referred to as Bus Switch.If the operating temperature is maintained at -40°C~85°C, turn signal switch will not be susceptible to external factors.When operated with a 2.3V~3.6V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.Multiplexers in the 74CBTLV series are suitable for a wide range of applications.As parts of its basic configuration, 20 terminations are desgined.You can also find related parts by using its logic switch base part number of 74CBTLV3245.The multiplexer's system is supplied with a voltage of 2.5V.This turn signal switch has a total of 20 component pins.As a result, conductors end at GULL WING.There is a type of supply of Single.A total of 20 pins are configured on this board.The mounting point is Surface Mount.There is a family of CBTLV/3B members.Signal multiplexer contains 8 bits.It is recommended that the minimum supply voltage (Vsup) be kept at 2.3V so that unnecessary failures can be prevented.Vsup (maximum supply voltage) should be kept as 3.6V to prevent unnecessary failures.In electronic terms, the digital switch ic is classified as part number Bus Driver/Transceivers.It consumes 20μA current of multiplexer ic since it is not affected by external factors.The performance of the multiplexers can be reliably maintained at a voltage of 3.3V.TR is used to package the switches.The resistance is 2.With a resistance of 7Ohm, it operates.For higher switches' flexibility, the output current is set to 64mA.