Parameters |
Factory Lead Time |
1 Week |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
20-VFQFN Exposed Pad |
Number of Pins |
20 |
Operating Temperature |
-40°C~125°C |
Packaging |
Tape & Reel (TR) |
Published |
2010 |
Series |
74CBTLV |
JESD-609 Code |
e4 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
20 |
Type |
Bus Switch |
Resistance |
60Ohm |
Max Power Dissipation |
500mW |
Technology |
CMOS |
Voltage - Supply |
2.3V~3.6V |
Terminal Position |
QUAD |
Number of Functions |
1 |
Terminal Pitch |
0.5mm |
Base Part Number |
74CBTLV3245 |
Pin Count |
20 |
Circuit |
8 x 1:1 |
Supply Voltage-Max (Vsup) |
3.6V |
Supply Voltage-Min (Vsup) |
2.3V |
Number of Ports |
2 |
Nominal Supply Current |
100mA |
Number of Bits |
8 |
Propagation Delay |
8.5 ns |
Quiescent Current |
50μA |
Turn On Delay Time |
8 ns |
Family |
CBTLV/3B |
Supply Type |
Single |
Turn-Off Delay Time |
8 ns |
Output Polarity |
TRUE |
High Level Output Current |
-128mA |
Low Level Output Current |
128mA |
Voltage Supply Source |
Single Supply |
Independent Circuits |
1 |
Length |
4.5mm |
Width |
2.5mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
74CBTLV3245BQ,115 Overview
This is a relatively small item of digital switch that is included in the 20-VFQFN Exposed Pad in order to save space on the board.It is packaged according to the Tape & Reel (TR) method.In terms of mounting, digital switch ic uses the Surface Mount method .In the multiplexers, the analog IC Bus Switch is used.When the operating temperature is kept at -40°C~125°C, the machine will not be sensturn signal switchive to external influences.With a supply voltage of 2.3V~3.6V, designers have greater flexibility of digital controlled switch.In addition to being a member of the 74CBTLV series, these multiplexers have a wide range of applications.As parts of its basic configuration, 20 terminations are desgined.You can also find related parts by using its logic switch base part number of 74CBTLV3245.In this turn signal switch, there are 20 component pins.There is a type of supply of Single.The board is configured with 20 pins.It is mounted in the way of Surface Mount.The logic switch is included into the family of CBTLV/3B.As a result, signal multiplexer provides 8 bits.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 2.3V.It is advisable to keep the maximum supply voltage (Vsup) at 3.6V so as to avoid some unnecessary failures.Without external influences, it consumes 50μA current of multiplexer ic.A resistance of 2 governs its operation.With a resistance of 60Ohm, it operates.
74CBTLV3245BQ,115 Features
Supplied in the 20-VFQFN Exposed Pad package
Adopting a supply type of Single
74CBTLV3245BQ,115 Applications
There are a lot of Nexperia USA Inc. 74CBTLV3245BQ,115 Signal Switches / Multiplexers / Decoders applications.
- Data-routing applications
- Code conversion
- Robotic vehicles
- Data distribution
- High-performance memory-decoding applications
- Analog to digital conversion
- Electronically controlled engine system
- Data bus control
- Combinational circuit
- Frequency multiplexing system