74CBTLV3245QG8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | QSOP |
| Number of Pins | 20 |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Power Supplies | 2.5/3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.3V |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 5 ns |
| Quiescent Current | 10μA |
| Family | CBTLV/3B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Independent Circuits | 1 |
| Length | 8.7mm |
| Width | 3.8mm |
| Thickness | 1.47mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74CBTLV3245QG8 Overview
For the purpose of saving board space, digital switch is included in the QSOP.There is a design for terminating 20 as part of its basic configuration.The turn signal switch is supplied with a voltage of 2.5V volts.This turn signal switch contains 20 component pins.GULL WING represents the end of conductors.There is a type of supply of Single.There are 20 pins on it.Multiplexer ics are mounted in the direction of Surface Mount.In the CBTLV/3B family, the logic switch is included.There are 8 bits in signal multiplexer.The power supply of 2.5/3.3V is provided for mux switch's normal operation.The digital switch ic is an electronic part classified into Bus Driver/Transceivers.It consumes 10μA current of multiplexer ic without external influences.With a resistance of 0, it operates.A maximum temperature of 85°C is acceptable for this signal switch.The minimal operating temperature of the multiplexer should be maintained at -40°C.The device is specified to operate at a maximum supply voltage of 3.6V in accordance with the applicable device specification.A minimum supply voltage of 2.3V is specified for the digital swith in accordance with its applicable specifications.For its logic, IC BUS DRIVER is used.
74CBTLV3245QG8 Features
Supplied in the QSOP package
Adopting a supply type of Single
Power supplies of 2.5/3.3V
BUS DRIVER as the logic IC
74CBTLV3245QG8 Applications
There are a lot of Integrated Device Technology (IDT) 74CBTLV3245QG8 Signal Switches / Multiplexers / Decoders applications.
- Relay
- Recording transmission
- Code conversion
- GLAN
- Enabling block of memory depending on address in memory chips
- Microprocessor instruction decoding
- Speed synchronization of multiple motors in industries
- Analog, digital or video signal switching
- Seven segment displays
- HD surveillance system
