74CBTLV3253BQ,115
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-VFQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | 74CBTLV |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Multiplexer/Demultiplexer |
| Technology | CMOS |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | QUAD |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74CBTLV3253 |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Circuit | 2 x 4:1 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 2.3V |
| Number of Bits | 8 |
| Propagation Delay | 7.5 ns |
| Quiescent Current | 50μA |
| Turn On Delay Time | 7.5 ns |
| Family | CBTLV/3B |
| Logic Function | Demultiplexer, Demux, Multiplexer, Mux |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Length | 3.5mm |
| Width | 2.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74CBTLV3253BQ,115 Overview
This is a relatively small item of digital switch that is included in the 16-VFQFN Exposed Pad in order to save space on the board.Tape & Reel (TR) is the packaging method.As far as mounting is concerned, digital switch ic uses Surface Mount.Multiplexer/Demultiplexer is the analog IC that the multiplexers uses.In the case of -40°C~125°C, turn signal switch will not be affected by external factors.Using a 2.3V~3.6V supply voltage provides digital controlled switch's superior flexibility for designers.The multiplexers can be used for a wide range of applications since they are members of 74CBTLV series.There are 16 terminations included in its basic configuration.There is a base part number 74CBTLV3253 that can be used to locate signal switch's related components as well.The turn signal switch is supplied with a voltage of 3.3V volts.Currently, this turn signal switch has a total of 16 component pins.As a type of supply, Single is employed.Currently, it is configured with a 16 pin configuration.The mount is in Surface Mount.The logic switch is a member of the CBTLV/3B family.Signal multiplexer provides 8 bits.It is recommended that the minimum supply voltage (Vsup) be kept at 2.3V to avoid some unnecessary failures.In order to avoid some unnecessary failures, you should maintain a maximum supply voltage (Vsup) of 3.6V.For the turn signal switch's operation, there are 4 outputs.In the absence of external influences, it consumes 50μA current of multiplexer ic.
74CBTLV3253BQ,115 Features
Supplied in the 16-VFQFN Exposed Pad package
Adopting a supply type of Single
74CBTLV3253BQ,115 Applications
There are a lot of Nexperia USA Inc. 74CBTLV3253BQ,115 Signal Switches / Multiplexers / Decoders applications.
- Control unit of Central Processing unit (CPU)
- Analog to digital conversion
- CPU memory location identification
- Computer memory
- Microprocessor memory systems
- Image transmission
- D/A converters
- Combinational circuit
- Decimal decoder
- Logic circuits
