74CBTLV3253PGG
| Parameters | |
|---|---|
| Supply Type | Single |
| Output Polarity | TRUE |
| Logic IC Type | MULTIPLEXER AND DEMUX/DECODER |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Number of Input Lines | 4 |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 16 |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Other Logic ICs |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Power Supplies | 2.5/3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.3V |
| Number of Bits | 8 |
| Propagation Delay | 250 ps |
| Quiescent Current | 10μA |
| Turn On Delay Time | 5.5 ns |
| Family | CBTLV/3B |
| Output Characteristics | 3-STATE |
74CBTLV3253PGG Overview
The reason it is provided is that the board space can be saved by placing digital switch in the TSSOP.As part of its basic configuration, 16 terminations are designed as a part of it.For multiplexer's system, a voltage of 2.5V is supplied.A component pin count of 16 can be found on this turn signal switch.As a result, GULL WING represents the end of the conductors.In this case, Single is employed as the supply type.The board has 16 pins configured.The mounting is in the way of Surface Mount.I would like to refer to the logic switch as a member of the CBTLV/3B family.Signal multiplexer provides 8 bits.A power supply is provided for mux switch's normal operation of 2.5/3.3V.The turn signal switch has 1 outputs.This is an the digital switch ic that is classified as Other Logic ICs.There are no external influences on this multiplexer ic, so it consumes 10μA current.As a voltage level input, the multiplexers have 4 lines.The signal switch can operate at a maximum temperature of 85°C.In order to maintain a minimal operating temperature, the temperature of the multiplexer should be set to -40°C.The relevant device specification specifies a maximum supply voltage of 3.6V for the signal switches.The digital swith is specified to operate at the minimum supply voltage of 2.3V in compliance with the applicable device specification.In terms of logic ICs, it uses MULTIPLEXER AND DEMUX/DECODER.
74CBTLV3253PGG Features
Supplied in the TSSOP package
Adopting a supply type of Single
Power supplies of 2.5/3.3V
4 input lines
MULTIPLEXER AND DEMUX/DECODER as the logic IC
74CBTLV3253PGG Applications
There are a lot of Integrated Device Technology (IDT) 74CBTLV3253PGG Signal Switches / Multiplexers / Decoders applications.
- HD surveillance system
- PCIe
- Data bus control
- Telephone network
- Data distribution
- Analog to digital conversion
- High-performance memory-decoding applications
- Make full adder
- To select different devices in microprocessor input
- Code conversion
