74CBTLV3253PW-Q10J
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| Series | 74CBTLV |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Multiplexer/Demultiplexer |
| Resistance | 8.4Ohm |
| Technology | CMOS |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74CBTLV3253 |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Circuit | 2 x 4:1 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 2.3V |
| Number of Bits | 8 |
| Propagation Delay | 7.5 ns |
| Quiescent Current | 50μA |
| Family | CBTLV/3B |
| Logic Function | Demultiplexer, Multiplexer |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74CBTLV3253PW-Q10J Overview
For the purpose of saving board space, digital switch is included in the 16-TSSOP (0.173, 4.40mm Width).Tape & Reel (TR) is the packaging method.Mounting is performed using Surface Mount.The analog IC used in the multiplexers can be referred to as Multiplexer/Demultiplexer.In the case of -40°C~125°C, turn signal switch will not be affected by external factors.Designers have greater flexibility using digital controlled switch when it works with 2.3V~3.6V voltage.In addition to being a member of the 74CBTLV series, these multiplexers have a wide range of applications.This configuration includes 16 terminations as part of its basic functionality.Its logic switch base part number is 74CBTLV3253 which can also be used to find its logic switch related parts.The voltage supplied for multiplexer's system is 2.5V.multiplexer's systemThis turn signal switch contains 16 component pins.Conductors terminate at GULL WING in this design.This supply type employs Single.Currently, it is configured with 16 pins.It is positioned in the direction of Surface Mount.The logic switch belongs to the family of CBTLV/3B.Signal multiplexer consists of 8 bits.Keeping the minimum supply voltage (Vsup) at 2.3V prevents some unnecessary failures.It is advisable to keep the maximum supply voltage (Vsup) at 3.6V so as to avoid some unnecessary failures.As part of the operation of this turn signal switch, there are 4 outputs.It consumes 50μA current of multiplexer ic since it is not affected by external factors.A resistance of 8.4Ohm is used to operate it.
74CBTLV3253PW-Q10J Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
74CBTLV3253PW-Q10J Applications
There are a lot of Nexperia USA Inc. 74CBTLV3253PW-Q10J Signal Switches / Multiplexers / Decoders applications.
- High-performance memory systems
- Computer memory
- Data collection system
- HD surveillance system
- Arithmetic Logic Units
- Microprocessor input/output systems
- Recording transmission
- VGA
- CPU memory location identification
- Enabling block of memory depending on address in memory chips
