74CBTLV3253PW,118
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | 74CBTLV |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Multiplexer/Demultiplexer |
| Resistance | 8.4Ohm |
| Technology | CMOS |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74CBTLV3253 |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Circuit | 2 x 4:1 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Number of Channels | 2 |
| Power Dissipation | 500mW |
| Number of Bits | 8 |
| Propagation Delay | 7.5 ns |
| Quiescent Current | 50μA |
| Turn On Delay Time | 7.5 ns |
| Family | CBTLV/3B |
| Logic Function | Demultiplexer |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Number of Input Lines | 4 |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Length | 5mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74CBTLV3253PW,118 Overview
Providing this information in the 16-TSSOP (0.173, 4.40mm Width) enables digital switch board space to be saved.Tape & Reel (TR) represents its packaging.As far as mounting is concerned, digital switch ic uses Surface Mount.In the multiplexers, the analog IC Multiplexer/Demultiplexer is used.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at -40°C~125°C.The turn signal switch is designed for use with a 2.3V~3.6V supply voltage, which gives it a lot of flexibility.Multiplexers of the 74CBTLV series can be used in a wide range of applications.There are 16 terminations included in its basic configuration.In addition, it also has a base part number of 74CBTLV3253, which can be used to find related parts.The voltage supplied for multiplexer's system is 3.3V.multiplexer's systemThere are 16 component pins in this turn signal switch.It is the end of conductors that is represented by GULL WING.There is a supply type of Single employed as part of this supply.It is configured with 16 pins.It is positioned in the direction of Surface Mount.The logic switch belongs to the family of CBTLV/3B.In the signal multiplexer, there are 8 bits available.It is advisable to keep the maximum supply voltage (Vsup) at 3.6V so as to avoid some unnecessary failures.The turn signal switch has 4 outputs.In the absence of external influences, it consumes 50μA current of multiplexer ic.8.4Ohm is the resistance at which it operates.For the purpose of accepting voltage levels, the multiplexers have 4 input lines.The turn signal switch's circuit has 2 transmission channels.
74CBTLV3253PW,118 Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
4 input lines
74CBTLV3253PW,118 Applications
There are a lot of Nexperia USA Inc. 74CBTLV3253PW,118 Signal Switches / Multiplexers / Decoders applications.
- Metal detectors
- VGA
- GLAN
- Speed control of medern motors
- Speed synchronization of multiple motors in industries
- Arithmetic Logic Units
- Logic gates for other digital devices
- Data communication
- HDMI applications
- RF-based home automation system
