74CBTLV3257BQ,115
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-VFQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2001 |
| Series | 74CBTLV |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Multiplexer/Demultiplexer |
| Resistance | 8.4Ohm |
| Technology | CMOS |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | QUAD |
| Number of Functions | 4 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74CBTLV3257 |
| Pin Count | 16 |
| Number of Elements | 1 |
| Circuit | 4 x 1:2 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 2.3V |
| Power Dissipation | 500mW |
| Propagation Delay | 6.7 ns |
| Quiescent Current | 50μA |
| Turn On Delay Time | 6.7 ns |
| Family | CBTLV/3B |
| Logic Function | Demultiplexer, Multiplexer |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 4 |
| Number of Output Lines | 8 |
| Length | 3.5mm |
| Width | 2.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74CBTLV3257BQ,115 Overview
Due to the lack of space on the board, digital switch is provided in the 16-VFQFN Exposed Pad.As a result, it is packaged in the way of Tape & Reel (TR).As far as mounting is concerned, digital switch ic uses Surface Mount.A digital IC Multiplexer/Demultiplexer is used as the analog component of the multiplexers.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~125°C TA.When digital controlled switch operates at 2.3V~3.6V, designers are provided with a greater degree of flexibility.Multiplexers from the 74CBTLV series can be used in a wide range of applications.As part of its basic configuration, 16 terminations are designed as a part of it.As its base part number is 74CBTLV3257, logic switch can also be used to find its related parts.The multiplexer is supplied with 2.5V voltage.This turn signal switch has a total of 16 component pins.The supply type of this multiplexer ic is Single.This multiplexer ic has 16 pins configured.The multiplexer ic is mounted in the direction of Surface Mount.The CBTLV/3B family includes the logic switch.It is recommended that the minimum supply voltage (Vsup) be kept at 2.3V to avoid some unnecessary failures.In order to avoid some unnecessary failures, you should maintain a maximum supply voltage (Vsup) of 3.6V.In the absence of external influences, it consumes 50μA current of multiplexer ic.A resistance of 8.4Ohm is used to operate the signal switching.The signal source consists of 8 output lines.In the mux switch configuration, there are 1 elements.
74CBTLV3257BQ,115 Features
Supplied in the 16-VFQFN Exposed Pad package
Adopting a supply type of Single
8 output lines
74CBTLV3257BQ,115 Applications
There are a lot of Nexperia USA Inc. 74CBTLV3257BQ,115 Signal Switches / Multiplexers / Decoders applications.
- PCIe
- Steel plants
- HD surveillance system
- LVDS
- A robotic vehicle with the metal detector
- Used to connect a single source to multiple destinations
- HDMI applications
- Encrypted communications system
- Make full adder
- Logic gates for other digital devices
