74CBTLV3257DS-Q10J
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | Automotive, AEC-Q100, 74CBTLV |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Multiplexer/Demultiplexer |
| Resistance | 8.4Ohm |
| Technology | CMOS |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 4 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74CBTLV3257 |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Number of Outputs | 2 |
| Circuit | 4 x 1:2 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 2.3V |
| Quiescent Current | 50μA |
| Family | CBTLV/3B |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 1 |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Propagation Delay (tpd) | 0.25 ns |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 4 |
| Height Seated (Max) | 1.73mm |
| Width | 3.9mm |
| RoHS Status | RoHS Compliant |
74CBTLV3257DS-Q10J Overview
As a means of saving space, digital switch is provided in the 16-SSOP (0.154, 3.90mm Width).As a result, it is packaged in a way that is referred to as Tape & Reel (TR).Digital switch ic uses a Surface Mount mounting method.The analog IC used in the multiplexers can be referred to as Multiplexer/Demultiplexer.If the operating temperature is maintained at -40°C~125°C TA, turn signal switch will not be susceptible to external factors.The turn signal switch is designed for use with a 2.3V~3.6V supply voltage, which gives it a lot of flexibility.Several applications are possible for Automotive, AEC-Q100, 74CBTLV series multiplexers.The basic configuration includes 16 terminations.The base part number is 74CBTLV3257, which can also be used to find its logic switch related parts.In multiplexer's system, 2.5V is the voltage supplied.There are 16 component pins in this turn signal switch.As a result, GULL WING represents the end of the conductors.There is a type of supply of Single.It is positioned in the direction of Surface Mount.The logic switch is a member of the family of CBTLV/3B.Avoid unnecessary failures by keeping the supply voltage (Vsup) at 2.3V.The maximal supply voltage (Vsup) should be kept at 3.6V to avoid some unnecessary failures.For the turn signal switch's operation, there are 2 outputs.In the absence of external influences, it consumes 50μA current of multiplexer ic.A multiplexer such as this has 1 inputs available.8.4Ohm is the resistance at which it operates.
74CBTLV3257DS-Q10J Features
Supplied in the 16-SSOP (0.154, 3.90mm Width) package
Adopting a supply type of Single
74CBTLV3257DS-Q10J Applications
There are a lot of Nexperia USA Inc. 74CBTLV3257DS-Q10J Signal Switches / Multiplexers / Decoders applications.
- Communication system
- Automatic health monitoring systems
- High-performance memory systems
- D/A converters
- Speed synchronization of multiple motors in industries
- Idle motor
- Automation system
- To select different devices in microprocessor output
- Data bus control
- Enabling block of memory depending on address in memory chips
