74CBTLV3257DS,118
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | 74CBTLV |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Multiplexer/Demultiplexer |
| Resistance | 8.4Ohm |
| Technology | CMOS |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 4 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.635mm |
| Base Part Number | 74CBTLV3257 |
| Pin Count | 16 |
| Number of Outputs | 2 |
| Number of Elements | 1 |
| Circuit | 4 x 1:2 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 2.3V |
| Number of Bits | 8 |
| Propagation Delay | 6.7 ns |
| Quiescent Current | 50μA |
| Turn On Delay Time | 6.7 ns |
| Family | CBTLV/3B |
| Logic Function | Demultiplexer, Multiplexer |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 4 |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74CBTLV3257DS,118 Overview
Due to the lack of space on the board, digital switch is provided in the 16-SSOP (0.154, 3.90mm Width).The package is in the form of Tape & Reel (TR).In terms of mounting, digital switch ic uses the Surface Mount method .For the analog part of the multiplexers, an IC Multiplexer/Demultiplexer is used.As long as the operating temperature is -40°C~125°C TA, turn signal switch will not be influenced by external factors.The turn signal switch is designed for use with a 2.3V~3.6V supply voltage, which gives it a lot of flexibility.Multiplexers in the 74CBTLV series are suitable for a wide range of applications.There are 16 terminations included in its basic configuration.There is a base part number of 74CBTLV3257 which can also be used in order to locate the logic switch that are related to this item.In multiplexer's system, 2.5V is the voltage supplied.In this turn signal switch, there are 16 component pins.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.This supply type employs Single.Currently, it is configured with 16 pins.Multiplexer ics are mounted in the direction of Surface Mount.The logic switch is a member of the family of CBTLV/3B.Signal multiplexer contains 8 bits.Keeping the minimum supply voltage (Vsup) at 2.3V prevents some unnecessary failures.Vsup (maximum supply voltage) should be kept as 3.6V to prevent unnecessary failures.There are 2 outputs designed to operate the turn signal switch.In the absence of external influences, it consumes 50μA current of multiplexer ic.The system operates with a resistance of 8.4Ohm.A configuration element for the mux switch consists of 1 elements.
74CBTLV3257DS,118 Features
Supplied in the 16-SSOP (0.154, 3.90mm Width) package
Adopting a supply type of Single
74CBTLV3257DS,118 Applications
There are a lot of Nexperia USA Inc. 74CBTLV3257DS,118 Signal Switches / Multiplexers / Decoders applications.
- Data distribution
- Arithmetic Logic Units
- Seven segment displays
- Control unit of Central Processing unit (CPU)
- Injectors
- A robotic vehicle with the metal detector
- Data communication
- D/A converters
- Enabling block of memory depending on address in memory chips
- Signal router
