banner_page

74CBTLV3257PGG8

16 Terminations16 Pin Signal switch4 Outputs1 FunctionsMin 2.3V VMax 3.6V V


  • Manufacturer: Integrated Device Technology (IDT)
  • Nocochips NO: 378-74CBTLV3257PGG8
  • Package: TSSOP
  • Datasheet: PDF
  • Stock: 217
  • Description: 16 Terminations16 Pin Signal switch4 Outputs1 FunctionsMin 2.3V VMax 3.6V V(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Contact Plating Tin
Mount Surface Mount
Package / Case TSSOP
Number of Pins 16
Published 2001
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1
Number of Terminations 16
ECCN Code EAR99
Resistance 40Ohm
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Subcategory Other Logic ICs
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 2.5V
Time@Peak Reflow Temperature-Max (s) 30
Pin Count 16
Number of Outputs 4
Power Supplies 2.5/3.3V
Temperature Grade INDUSTRIAL
Max Supply Voltage 3.6V
Min Supply Voltage 2.3V
Operating Supply Current 10μA
Number of Ports 3
Number of Bits 8
Propagation Delay 250 ps
Turn On Delay Time 6.1 ns
Family CBTLV/3B
Output Characteristics 3-STATE
Supply Type Single
Output Polarity TRUE
Logic IC Type BUS EXCHANGER
High Level Output Current -128mA
Low Level Output Current 128mA
Independent Circuits 1
Length 5mm
Width 4.4mm
Thickness 1mm
Radiation Hardening No
RoHS Status RoHS Compliant
Lead Free Lead Free

74CBTLV3257PGG8 Overview


Providing this information in the TSSOP enables digital switch board space to be saved.The basic configuration of this system includes 16 terminations.The multiplexer's system is powered by 2.5V volts.A component pin count of 16 can be found on this turn signal switch.As a result, conductors end at GULL WING.There is a supply type of Single employed as part of this supply.This multiplexer ic has 16 pins configured.This unit is mounted in the way of Surface Mount.The logic switch belongs to the family of CBTLV/3B.There are 8 bits signal multiplexer provides.Normally, 2.5/3.3V is powered by a battery.As part of the operation of this turn signal switch, there are 4 outputs.In electronic terms, the digital switch ic is classified as part number Other Logic ICs.The resistance of the signal switching is 3.A resistance of 40Ohm is used to operate it.The maximum operating temperature of 85°C is acceptable for this signal switch.In order to maintain a minimal operating temperature, the temperature of the multiplexer should be set to -40°C.Upon compliance with the applicable device specifications, the device will operate at the maximum supply voltage of 3.6V.The digital swith is specified to operate at the minimum supply voltage of 2.3V in compliance with the applicable device specification.It uses the logic IC BUS EXCHANGER as its core logic unit.Providing the load with a supply voltage of 10μA can maintain stability of the multiplexers.

74CBTLV3257PGG8 Features


Supplied in the TSSOP package
Adopting a supply type of Single
Power supplies of 2.5/3.3V
BUS EXCHANGER as the logic IC
Operating with the supply current of 10μA

74CBTLV3257PGG8 Applications


There are a lot of Integrated Device Technology (IDT) 74CBTLV3257PGG8 Signal Switches / Multiplexers / Decoders applications.

  • Robotic vehicles
  • Idle motor
  • Electronic circuits
  • High-performance memory systems
  • Small scale TV wall
  • To select different devices in microprocessor input
  • Signal router
  • Logic circuits
  • HD surveillance system
  • Automation system

Write a review

Note: HTML is not translated!
    Bad           Good