74CBTLV3257QG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | QSOP |
| Number of Pins | 16 |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Other Logic ICs |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.635mm |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.3V |
| Number of Ports | 3 |
| Number of Bits | 8 |
| Propagation Delay | 250 ps |
| Turn On Delay Time | 6.1 ns |
| Family | CBTLV/3B |
| Logic Function | Demultiplexer, Multiplexer |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| Logic IC Type | BUS EXCHANGER |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Number of Input Lines | 2 |
| Number of Output Lines | 1 |
| Length | 4.9mm |
| Width | 3.8mm |
| Thickness | 1.47mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74CBTLV3257QG Overview
In order to save board space, digital switch is located in the QSOP.Among its basic features are 16 terminations.The multiplexer's system is powered by 2.5V voltage.A component pin count of 16 is found on this turn signal switch.A conductor terminates at GULL WING.In this case, the supply type is Single.With 16 pins, it is configured.The mounting point is Surface Mount.The logic switch is a member of the family of CBTLV/3B.In the signal multiplexer, there are 8 bits available.The turn signal switch contains 4 outputs designed to operate.Other Logic ICs is a category for the digital switch ics.3 ports are used for some other peripheral signal switchings to plug in.The multiplexers have 2 input lines used to accept voltage levels.In this case, the signal source has a total of 1 output lines.The maximum operating temperature of 85°C is acceptable for this signal switch.It is recommended that a minimum operating temperature of the multiplexer of -40°C be maintained.The relevant device specification specifies a maximum supply voltage of 3.6V for the signal switches.A minimum supply voltage of 2.3V is specified for the digital swith by its applicable specification.It uses the logic IC BUS EXCHANGER as its core logic unit.
74CBTLV3257QG Features
Supplied in the QSOP package
Adopting a supply type of Single
2 input lines
1 output lines
BUS EXCHANGER as the logic IC
74CBTLV3257QG Applications
There are a lot of Integrated Device Technology (IDT) 74CBTLV3257QG Signal Switches / Multiplexers / Decoders applications.
- GLAN
- Microprocessor memory systems
- War field flying robot with a night vision flying camera
- Code conversion
- RF-based home automation system
- Enabling different rows of memory depending on address in memory chips
- LVDS
- Seven segment displays
- Microprocessor input/output systems
- Solenoid cooling fan
