74CBTLV3384QG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | QSOP |
| Number of Pins | 24 |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Resistance | 40Ohm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.635mm |
| Pin Count | 24 |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.3V |
| Number of Ports | 2 |
| Number of Bits | 10 |
| Propagation Delay | 5.5 ns |
| Quiescent Current | 10μA |
| Turn On Delay Time | 5.5 ns |
| Family | CBTLV/3B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Independent Circuits | 2 |
| Length | 8.7mm |
| Width | 3.8mm |
| Thickness | 1.47mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74CBTLV3384QG Overview
For the purpose of saving board space, digital switch is included in the QSOP.There are 24 terminations included in its basic configuration.The multiplexer's system works with 2.5V voltage.Currently, this turn signal switch has a total of 24 component pins.GULL WING is used as the point at which the conductors come to an end as part of this formula.Single is used as its supply type.A total of 24 pins are configured on this board.As you can see, it is mounted in the direction of Surface Mount.The logic switch is a member of the family of CBTLV/3B.In this signal multiplexer, there are 10 bits that are provided.This is a signal switch that is categorized as Bus Driver/Transceivers.Without the influence of external factors, it consumes 10μA current of multiplexer ic.2 ports are used for some other peripheral signal switchings to plug in.This signal switching operates at a resistance of 40Ohm.It is acceptable for this signal switch to operate at the maximal temperature of 85°C.It is recommended that the minimal operating temperature of the multiplexer be maintained at -40°C.Device specifications specify 3.6V as the maximum supply voltage for the signal switches.The digital swith is specified to operate at the minimum supply voltage of 2.3V in compliance with the applicable device specification.As its logic IC, it uses BUS DRIVER.
74CBTLV3384QG Features
Supplied in the QSOP package
Adopting a supply type of Single
BUS DRIVER as the logic IC
74CBTLV3384QG Applications
There are a lot of Integrated Device Technology (IDT) 74CBTLV3384QG Signal Switches / Multiplexers / Decoders applications.
- Data-routing applications
- Signal router
- Make full adder
- GLAN
- Memory chips
- Speed synchronization of multiple motors in industries
- Electronically controlled engine system
- Microprocessor memory systems
- Seven segment displays
- Data bus control
