74CBTLV3857DBQRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 24 |
| Weight | 129.500622mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CBTLV |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 24 |
| Type | Bus Switch |
| Resistance | 8Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.635mm |
| Base Part Number | 74CBTLV3857 |
| Pin Count | 24 |
| Operating Supply Voltage | 3.3V |
| Circuit | 10 x 1:1 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Ports | 2 |
| Nominal Supply Current | 25mA |
| Output Current | 24mA |
| Number of Bits | 10 |
| Propagation Delay | 250 ps |
| Family | CBTLV/3B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | 24mA |
| Low Level Output Current | 24mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Length | 8.65mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
74CBTLV3857DBQRG4 Overview
Due to the fact that it is provided in the 24-SSOP (0.154, 3.90mm Width), digital switch allows the board to be compacted.Tape & Reel (TR) represents its packaging.As far as mounting is concerned, digital switch ic uses Surface Mount.As the analog part, the circuit uses an analog IC Bus Switch.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.When digital controlled switch operates at 3V~3.6V, designers have superior flexibility.With the 74CBTLV series, the multiplexers are suitable for a diverse range of applications.The basic configuration includes 24 terminations.The part number for 74CBTLV3857 can be used to find its logic switch related parts as well.The multiplexer's system is supplied with a voltage of 3.3V.In this turn signal switch, there are 24 component pins.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.Single is employed as its supply type.There are 24 pins on it.It is positioned in the direction of Surface Mount.The logic switch is a member of the CBTLV/3B family.Signal multiplexer consists of 10 bits.It is recommended that the minimum supply voltage (Vsup) be kept at 3V so that unnecessary failures can be prevented.Vsup (maximum supply voltage) should be kept as 3.6V to prevent unnecessary failures.The digital switch ic is an electronic part classified into Bus Driver/Transceivers.With a supply voltage of 3.3V, reliable performance of the multiplexers can be achieved.The system operates with a resistance of 2.With a resistance of 8Ohm, it operates.There is an output current of 24mA that allows for greater switches' flexibility.
74CBTLV3857DBQRG4 Features
Supplied in the 24-SSOP (0.154, 3.90mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 3.3V
74CBTLV3857DBQRG4 Applications
There are a lot of Texas Instruments 74CBTLV3857DBQRG4 Signal Switches / Multiplexers / Decoders applications.
- VGA
- Recording transmission
- Used to connect a single source to multiple destinations
- Time division multiplexing system
- Logic gates for other digital devices
- Data demultiplexing
- Encrypted communications system
- Arithmetic Logic Units
- Electronic circuits
- Relay
