74CBTLV3857DGVRE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 24 |
| Weight | 60.894776mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CBTLV |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Type | Bus Switch |
| Resistance | 8Ohm |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.4mm |
| Base Part Number | 74CBTLV3857 |
| Pin Count | 24 |
| Operating Supply Voltage | 3.3V |
| Circuit | 10 x 1:1 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 10 |
| Propagation Delay | 250 ps |
| Family | CBTLV/3B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | 24mA |
| Low Level Output Current | 24mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74CBTLV3857DGVRE4 Overview
Digital switch is provided in the 24-TFSOP (0.173, 4.40mm Width) for the purpose of saving board space.The package is in the form of Tape & Reel (TR).The method digital switch ic adopts for mounting is Surface Mount.In the multiplexers, the analog IC Bus Switch is used.The operating temperature of -40°C~85°C will not be susceptible to external factors.Using a 3V~3.6V supply voltage provides digital controlled switch's superior flexibility for designers.Since they are members of the 74CBTLV series, they can be used in a wide variety of applications.There are 24 terminations included in its basic configuration.You can also find related parts by using its logic switch base part number of 74CBTLV3857.The multiplexer's system is supplied with a voltage of 3.3V.In this turn signal switch, there are 24 components that can be connected to each pin.As a result, GULL WING represents the end of the conductors.There is a type of supply Single that is employed in this case.This multiplexer ic is configured with 24 pins.The mounting point is Surface Mount.There is a family of CBTLV/3B members.In this signal multiplexer, there are 10 bits that are provided.Keeping the minimum supply voltage (Vsup) at 3V prevents some unnecessary failures.Avoid unnecessary failures by keeping Vsup at 3.6V.The digital switch ic is a part of an electronic system classified as Bus Driver/Transceivers.With a supply voltage of 3.3V, reliable performance of the multiplexers can be achieved.The system operates with a resistance of 2.8Ohm is the resistance at which it operates.For higher switches' flexibility, the output current is set to 24mA.
74CBTLV3857DGVRE4 Features
Supplied in the 24-TFSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 3.3V
74CBTLV3857DGVRE4 Applications
There are a lot of Texas Instruments 74CBTLV3857DGVRE4 Signal Switches / Multiplexers / Decoders applications.
- A robotic vehicle with the metal detector
- Paper plants
- Data demultiplexing
- Data-routing applications
- Relay
- RF-based home automation system
- High-performance memory-decoding applications
- Video transmission
- Transmission from the computer system of a satellite
- High-performance memory systems
