Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
24-TFSOP (0.173, 4.40mm Width) |
Number of Pins |
24 |
Weight |
59.987591mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Series |
74CBTLV |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
24 |
Type |
Bus Switch |
Resistance |
9Ohm |
Subcategory |
Bus Driver/Transceivers |
Technology |
CMOS |
Voltage - Supply |
3V~3.6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Terminal Pitch |
0.4mm |
Base Part Number |
74CBTLV3857 |
Pin Count |
24 |
Operating Supply Voltage |
3.3V |
Circuit |
10 x 1:1 |
Supply Voltage-Max (Vsup) |
3.6V |
Supply Voltage-Min (Vsup) |
3V |
Number of Ports |
2 |
Output Current |
24mA |
Number of Bits |
10 |
Propagation Delay |
250 ps |
Family |
CBTLV/3B |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Output Polarity |
TRUE |
High Level Output Current |
24mA |
Low Level Output Current |
24mA |
Voltage Supply Source |
Single Supply |
Independent Circuits |
1 |
Length |
5mm |
Width |
4.4mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
74CBTLV3857DGVRG4 Overview
Due to the fact that it is provided in the 24-TFSOP (0.173, 4.40mm Width), digital switch allows the board to be compacted.The package is in the form of Tape & Reel (TR).Surface Mount is the mounting method digital switch ic uses.The analog IC used in the multiplexers can be referred to as Bus Switch.By keeping the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.Designers have greater flexibility when digital controlled switch operates at a 3V~3.6V supply voltage.The multiplexers from 74CBTLV series can be used for a wide range of applications.As parts of its basic configuration, 24 terminations are desgined.The part number for 74CBTLV3857 can be used to find its logic switch related parts as well.The multiplexer's system is supplied with a voltage of 3.3V.A component pin count of 24 is found on this turn signal switch.GULL WING is used as the point at which the conductors come to an end as part of this formula.This supply type employs Single.This multiplexer ic is configured with 24 pins.This unit is mounted in the way of Surface Mount.The logic switch is a member of the family of CBTLV/3B.Signal multiplexer consists of 10 bits.Keeping Vsup at 3V will prevent some unwanted failures.Keeping Vsup at 3.6V will prevent some unnecessary failures.I would classify the digital switch ic as an electronic part belonging to the Bus Driver/Transceivers category.Providing a supply voltage of 3.3V can provide reliable performance of the multiplexers.This signal switching operates at a resistance of 2.9Ohm is the resistance at which it operates.24mA provides a high degree of switches' flexibility.
74CBTLV3857DGVRG4 Features
Supplied in the 24-TFSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 3.3V
74CBTLV3857DGVRG4 Applications
There are a lot of Texas Instruments 74CBTLV3857DGVRG4 Signal Switches / Multiplexers / Decoders applications.
- PCIe
- To select different devices in microprocessor input
- Combinational circuit
- Decimal decoder
- Make full adder
- Arithmetic Logic Units
- Memory system of computers
- Computer memory
- Signal router
- Analog, digital or video signal switching