74CBTLV3861PGG
| Parameters | |
|---|---|
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 24 |
| Qualification Status | Not Qualified |
| Power Supplies | 2.5/3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.3V |
| Number of Ports | 2 |
| Nominal Supply Current | 128mA |
| Number of Bits | 10 |
| Propagation Delay | 250 ps |
| Quiescent Current | 10μA |
| Turn On Delay Time | 4.2 ns |
| Family | CBTLV/3B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Turn-Off Delay Time | 5 ns |
| Output Polarity | TRUE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Independent Circuits | 1 |
| Length | 7.8mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 24 |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
74CBTLV3861PGG Overview
In order to save board space, digital switch is located in the TSSOP.There is a design for terminating 24 as part of its basic configuration.For multiplexer's system, a voltage of 2.5V is supplied.This turn signal switch contains 24 component pins.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.There is a type of supply of Single.A total of 24 pins are configured on this board.Surface Mount is the way it is mounted.The CBTLV/3B family includes the logic switch.Signal multiplexer consists of 10 bits.During mux switch's normal operation, 2.5/3.3V is provided with a power supply.Bus Driver/Transceivers is a category for the digital switch ics.Despite not interacting with external factors, it consumes 10μA current of multiplexer ic.The resistance of the signal switching is 2.Signal switch operation at 85°C temperature is acceptable.Ideally, the temperature of the multiplexer should not exceed -40°C.In accordance with the applicable device specifications, the signal switches operates at a maximum supply voltage of 3.6V.In compliance with the applicable device specification, the digital swith operates at a minimum supply voltage of 2.3V.IC BUS DRIVER is used for the logic of this chip.
74CBTLV3861PGG Features
Supplied in the TSSOP package
Adopting a supply type of Single
Power supplies of 2.5/3.3V
BUS DRIVER as the logic IC
74CBTLV3861PGG Applications
There are a lot of Integrated Device Technology (IDT) 74CBTLV3861PGG Signal Switches / Multiplexers / Decoders applications.
- LVDS
- Memory system of computers
- CNC machines
- HD surveillance system
- Logic circuits
- War field flying robot with a night vision flying camera
- Signal router
- Medical industry
- High-performance memory-decoding applications
- RF-based home automation system
