Parameters |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 |
Number of Terminations |
24 |
ECCN Code |
EAR99 |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Subcategory |
Bus Driver/Transceivers |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
2.5V |
Terminal Pitch |
0.635mm |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Pin Count |
24 |
Qualification Status |
Not Qualified |
Power Supplies |
2.5/3.3V |
Temperature Grade |
INDUSTRIAL |
Max Supply Voltage |
3.6V |
Min Supply Voltage |
2.3V |
Number of Ports |
2 |
Number of Bits |
10 |
Propagation Delay |
6 ns |
Quiescent Current |
10μA |
Family |
CBTLV/3B |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Output Polarity |
TRUE |
Logic IC Type |
BUS DRIVER |
High Level Output Current |
-128mA |
Low Level Output Current |
128mA |
Independent Circuits |
1 |
Length |
8.7mm |
Width |
3.8mm |
Thickness |
1.47mm |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Contact Plating |
Tin |
Mount |
Surface Mount |
Package / Case |
QSOP |
Number of Pins |
24 |
Published |
2005 |
74CBTLV3862QG Overview
Digital switch is provided in the QSOP for the purpose of saving board space.Its basic configuration includes terminations in the 24 range.The multiplexer is supplied with 2.5V voltage.This turn signal switch contains 24 component pins.GULL WING is used as the point at which the conductors come to an end as part of this formula.In this case, the supply type is Single.A total of 24 pins are configured on this board.The mounting point is Surface Mount.The logic switch is included into the family of CBTLV/3B.Signal multiplexer provides 10 bits.For mux switch's normal operation, there is a power supply provided at 2.5/3.3V.The digital switch ic is an electronic part classified into Bus Driver/Transceivers.It consumes 10μA current of multiplexer ic without external influences.As far as the resistance is concerned, it operates with 2.A maximum temperature of 85°C is acceptable for this signal switch.Maintaining a minimum operating temperature of the multiplexer of -40°C is recommended.The relevant device specification specifies a maximum supply voltage of 3.6V for the signal switches.The digital swith is specified to operate at the minimum supply voltage of 2.3V in compliance with the applicable device specification.As its logic IC, it uses BUS DRIVER.
74CBTLV3862QG Features
Supplied in the QSOP package
Adopting a supply type of Single
Power supplies of 2.5/3.3V
BUS DRIVER as the logic IC
74CBTLV3862QG Applications
There are a lot of Integrated Device Technology (IDT) 74CBTLV3862QG Signal Switches / Multiplexers / Decoders applications.
- Code converters
- Enabling different functions units in microprocessor instruction decoding
- Automation system
- Data transfer
- Make full adder
- Medium scale TV wall
- Speed control of medern motors
- Control unit of Central Processing unit (CPU)
- To select different task for memory in microprocessor memory systems
- Paper plants