Parameters |
Factory Lead Time |
1 Week |
Contact Plating |
Tin |
Mount |
Surface Mount |
Package / Case |
TSSOP |
Number of Pins |
24 |
Published |
2006 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 |
Number of Terminations |
24 |
ECCN Code |
EAR99 |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Subcategory |
Bus Driver/Transceivers |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
2.5V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Pin Count |
24 |
Qualification Status |
Not Qualified |
Power Supplies |
2.5/3.3V |
Temperature Grade |
INDUSTRIAL |
Max Supply Voltage |
3.6V |
Min Supply Voltage |
2.3V |
Number of Ports |
2 |
Number of Bits |
10 |
Propagation Delay |
5.6 ns |
Quiescent Current |
10μA |
Family |
CBTLV/3B |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Output Polarity |
TRUE |
Logic IC Type |
BUS DRIVER |
High Level Output Current |
-128mA |
Low Level Output Current |
128mA |
Independent Circuits |
1 |
Length |
7.8mm |
Width |
4.4mm |
Thickness |
1mm |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
74CBTLV6800PGG8 Overview
Digital switch is provided in the TSSOP for the purpose of saving board space.Its basic configuration includes terminations in the 24 range.For multiplexer's system, a voltage of 2.5V is supplied.In this turn signal switch, there are 24 components that can be connected to each pin.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.Single is used as its supply type.With 24 pins, it is configured.Multiplexer ics are mounted in the direction of Surface Mount.In the CBTLV/3B family, the logic switch is included.Signal multiplexer consists of 10 bits.There is a power supply provided for the mux switch's normal operation of 2.5/3.3V.Part number Bus Driver/Transceivers indicates that the digital switch ic is an electronic part.Despite not interacting with external factors, it consumes 10μA current of multiplexer ic.With a resistance of 0, it operates.Signal switchs at temperatures up to 85°C are acceptable.Keeping the temperature of the multiplexer at -40°C is the minimum operating temperature.In accordance with the applicable device specifications, the signal switches operates at a maximum supply voltage of 3.6V.A minimum supply voltage of 2.3V is required to operate the digital swith.The logic IC of the digitalswitch is BUS DRIVER.
74CBTLV6800PGG8 Features
Supplied in the TSSOP package
Adopting a supply type of Single
Power supplies of 2.5/3.3V
BUS DRIVER as the logic IC
74CBTLV6800PGG8 Applications
There are a lot of Integrated Device Technology (IDT) 74CBTLV6800PGG8 Signal Switches / Multiplexers / Decoders applications.
- Memory chips
- A/D converters
- Enabling block of memory depending on address in memory chips
- Frequency multiplexing system
- Electronic circuits
- Video transmission
- GLAN
- Analog to digital conversion
- Night vision cameras
- VGA