74CBTLVD3861PW,118
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Type | Bus Switch |
| Resistance | 4.7Ohm |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74CBTLVD3861 |
| Pin Count | 24 |
| Operating Supply Voltage | 3.3V |
| Circuit | 10 x 1:1 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Ports | 2 |
| Number of Bits | 10 |
| Propagation Delay | 8 ns |
| Quiescent Current | 150μA |
| Turn On Delay Time | 8 ns |
| Family | CBTLV/3B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Length | 7.8mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74CBTLVD3861PW,118 Overview
In order to conserve board space, digital switch is included in the 24-TSSOP (0.173, 4.40mm Width).The package is packaged in accordance with Tape & Reel (TR).Surface Mount is the mounting method digital switch ic uses.The analog IC in the multiplexers is identified as Bus Switch.In the case of -40°C~125°C, turn signal switch will not be affected by external factors.The turn signal switch is designed for use with a 3V~3.6V supply voltage, which gives it a lot of flexibility.The basic configuration includes 24 terminations.The base part number is 74CBTLVD3861, which can also be used to find its logic switch related parts.For multiplexer's system, a voltage of 3.3V is supplied.This turn signal switch has 24 component pins.A conductor terminates at GULL WING.As a type of supply, Single is employed.This multiplexer ic has 24 pins configured.The mounting point is Surface Mount.Among the family of CBTLV/3B the logic switch is a member.There are 10 bits in signal multiplexer.In order to prevent unnecessary failures, it is recommended that the minimal supply voltage (Vsup) be kept at 3V.It is advisable to keep the maximum supply voltage (Vsup) at 3.6V so as to avoid some unnecessary failures.No external influence consumes 150μA current of multiplexer ic.When a supply voltage of 3.3V is used, reliable performance of the multiplexers can be achieved.A resistance of 2 governs its operation.This signal switching operates at a resistance of 4.7Ohm.
74CBTLVD3861PW,118 Features
Supplied in the 24-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 3.3V
74CBTLVD3861PW,118 Applications
There are a lot of Nexperia USA Inc. 74CBTLVD3861PW,118 Signal Switches / Multiplexers / Decoders applications.
- Automatic Monitoring systems
- RF-based home automation system
- Data collection system
- Logic gates for other digital devices
- Encrypted communications system
- High-performance memory-decoding applications
- Electronically controlled engine system
- High-performance memory systems
- Data distribution
- Steel plants
