74CBTS16211DLRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 56 |
| Weight | 694.790113mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CBTS |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Type | Bus Switch |
| Resistance | 7Ohm |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 4V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74CBTS16211 |
| Pin Count | 56 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Circuit | 12 x 1:1 |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Nominal Supply Current | 3μA |
| Output Current | 64mA |
| Number of Bits | 24 |
| Propagation Delay | 250 ps |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 200MHz |
| Output Polarity | TRUE |
| High Level Output Current | 64mA |
| Low Level Output Current | 30mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 2 |
| Length | 18.415mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
74CBTS16211DLRG4 Overview
For the purpose of saving board space, digital switch is included in the 56-BSSOP (0.295, 7.50mm Width).The package is packaged in accordance with Tape & Reel (TR).In terms of mounting, digital switch ic uses the Surface Mount method .A digital IC Bus Switch is used as the analog component of the multiplexers.When the operating temperature is kept at -40°C~85°C, the machine will not be sensturn signal switchive to external influences.Design engineers have more flexibility when digital controlled switch operates at 4V~5.5V voltage.In addition to being a member of the 74CBTS series, these multiplexers have a wide range of applications.The basic configuration of this system includes 56 terminations.As its base part number is 74CBTS16211, logic switch can also be used to find its related parts.The turn signal switch is supplied with a voltage of 5V volts.This turn signal switch has 56 component pins.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.The supply type of this multiplexer ic is Single.The board has 56 pins configured.Multiplexer ics are mounted in the direction of Surface Mount.The logic switch is a member of the CBT/FST/QS/5C/B family.In this signal multiplexer, there are 24 bits provided.Vsup should be kept at 4V to prevent some unnecessary failures.It is provided that 5V has a power supply in order to function normally.The digital switch ic is a part of an electronic system classified as Bus Driver/Transceivers.Providing a supply voltage of 5V can provide reliable performance of the multiplexers.With a resistance of 0, it operates.The system operates with a resistance of 7Ohm.For greater switches' flexibility, 64mA provides the output current.
74CBTS16211DLRG4 Features
Supplied in the 56-BSSOP (0.295, 7.50mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
74CBTS16211DLRG4 Applications
There are a lot of Texas Instruments 74CBTS16211DLRG4 Signal Switches / Multiplexers / Decoders applications.
- Arithmetic Logic Units
- Enabling different rows of memory depending on address in memory chips
- RF-based home automation system
- Data-routing applications
- Recording transmission
- Encrypted communications system
- A robotic vehicle with the metal detector
- War field flying robot with a night vision flying camera
- Used to connect a single source to multiple destinations
- Microprocessor instruction decoding
