74CBTS16212DLRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 56 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CBTS |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Type | Bus FET Exchange Switch |
| Resistance | 6Ohm |
| Additional Feature | TTL COMPATIBLE BUS SWITCH |
| Subcategory | Other Logic ICs |
| Technology | CMOS |
| Voltage - Supply | 4V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 12 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74CBTS16212 |
| Pin Count | 56 |
| Qualification Status | Not Qualified |
| Circuit | 12 x 2:2 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Number of Bits | 2 |
| Propagation Delay | 250 ps |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height Seated (Max) | 2.79mm |
| Width | 7.49mm |
| RoHS Status | ROHS3 Compliant |
74CBTS16212DLRG4 Overview
The reason it is provided is that the board space can be saved by placing digital switch in the 56-BSSOP (0.295, 7.50mm Width).The package is packaged in the manner of Tape & Reel (TR).In terms of mounting, digital switch ic uses the method of Surface Mount.In the multiplexers, the analog IC Bus FET Exchange Switch is used.The operating temperature of -40°C~85°C will not be susceptible to external factors.Designers have greater flexibility when digital controlled switch operates at a 4V~5.5V supply voltage.Multiplexers of the 74CBTS series can be used in a wide range of applications.As parts of its basic configuration, 56 terminations are desgined.You can also find related parts by using its logic switch base part number of 74CBTS16212.The multiplexer's system works with 5V voltage.This turn signal switch contains 56 component pins.A conductor terminates at GULL WING.There is a type of supply Single that is employed in this case.The board has 56 pins configured.The mount is in Surface Mount.The logic switch belongs to the family of CBT/FST/QS/5C/B.Signal multiplexer consists of 2 bits.The minimal supply voltage (Vsup) should be kept at 4V to avoid some unnecessary failures.In order to avoid some unnecessary failures, you should maintain a maximum supply voltage (Vsup) of 5.5V.For mux switch's normal operation, power supply 5V is provided.I would classify the digital switch ic as an electronic part belonging to the Other Logic ICs category.2 is the resistance at which it operates.The system operates with a resistance of 6Ohm.In addition, it provides improved characteristics compared to TTL COMPATIBLE BUS SWITCH.
74CBTS16212DLRG4 Features
Supplied in the 56-BSSOP (0.295, 7.50mm Width) package
Adopting a supply type of Single
Power supplies of 5V
TTL COMPATIBLE BUS SWITCH
74CBTS16212DLRG4 Applications
There are a lot of Texas Instruments 74CBTS16212DLRG4 Signal Switches / Multiplexers / Decoders applications.
- VGA
- Memory system of computers
- Robotic vehicles
- Time division multiplexing system
- Data collection system
- Signal router
- Injectors
- PCIe
- Small scale TV wall
- Electronics industry
