74F112SCX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Supplier Device Package | 16-SOIC |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74F |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | JK Type |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Voltage - Supply | 4.5V~5.5V |
| Frequency | 80MHz |
| Base Part Number | 74F112 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Number of Circuits | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 2 |
| Clock Frequency | 105MHz |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 5 ns |
| Logic Function | AND, Flip-Flop |
| Current - Quiescent (Iq) | 19mA |
| Current - Output High, Low | 1mA 20mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 6.5ns @ 5V, 50pF |
| Trigger Type | Negative Edge |
| High Level Output Current | -1mA |
| Low Level Output Current | 20mA |
| Number of Input Lines | 2 |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Negative Edge |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74F112SCX Overview
In the form of 16-SOIC (0.154, 3.90mm Width), it has been packaged. D flip flop is embedded in the Tape & Reel (TR) package. In the configuration, Differentialis used as the output. There is a trigger configured with Negative Edge. This electronic part is mounted in the way of Surface Mount. A supply voltage of 4.5V~5.5V is required for operation. Currently, the operating temperature is 0°C~70°C TA. It is an electronic flip flop with the type JK Type. FPGAs belonging to the 74Fseries contain this type of chip. This D flip flop should not have a frequency greater than 105MHz. There are 2 elements in it. Despite external influences, it consumes 19mAof quiescent current. JK flip flop belongs to 74F112 family. There is an electronic part mounted in the way of Surface Mount. The electronic flip flop is designed with pins 16. In this device, the clock edge trigger type is Negative Edge. The flip flop is designed with 2bits. Using 2 circuits, it is highly flexible. In order to ensure high efficiency, the supply voltage should remain at 5V. It operates with 3 output lines. As of now, there are 2input lines. There is -1mA output current at the high level. The low level output current is set to 20mA. There should be a temperature below 70°Cduring operation. A temperature above 0°Cshould be used for the operation. Initially, it requires a voltage of 4.5V as the minimum supply voltage. It is capable of supporting a maximum supply voltage of 5.5V. It is possible to achieve a frequency of 80MHz.
74F112SCX Features
Tape & Reel (TR) package
74F series
16 pins
2 Bits
74F112SCX Applications
There are a lot of ON Semiconductor 74F112SCX Flip Flops applications.
- Storage Registers
- CMOS Process
- Asynchronous counter
- Bus hold
- Instrumentation
- Latch
- Individual Asynchronous Resets
- Dynamic threshold performance
- ATE
- Circuit Design
