74F174SC
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Supplier Device Package | 16-SOIC |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74F |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Voltage - Supply | 4.5V~5.5V |
| Frequency | 80MHz |
| Base Part Number | 74F174 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 7 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 6 |
| Clock Frequency | 80MHz |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 5.5 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 45mA |
| Current - Output High, Low | 1mA 20mA |
| Number of Bits per Element | 6 |
| Max Propagation Delay @ V, Max CL | 10ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| High Level Output Current | -1mA |
| Low Level Output Current | 20mA |
| Number of Input Lines | 6 |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74F174SC Overview
The flip flop is packaged in 16-SOIC (0.154, 3.90mm Width). D flip flop is included in the Tubepackage. T flip flop is configured with an output of Non-Inverted. There is a trigger configured with Positive Edge. It is mounted in the way of Surface Mount. The JK flip flop operates at 4.5V~5.5Vvolts. A temperature of 0°C~70°C TAis used in the operation. A flip flop of this type is classified as a D-Type. In FPGA terms, D flip flop is a type of 74Fseries FPGA. It should not exceed 80MHzin terms of its output frequency. A total of 1elements are contained within it. This process consumes 45mA quiescents. The 74F174 family contains this object. It is mounted in the way of Surface Mount. It is designed with 16 pins. There is a clock edge trigger type of Positive Edgeon this device. This flip flop is designed with 6 Bits. Despite its superior flexibility, it relies on 7 circuits to achieve it. For high efficiency, the supply voltage should be set to 5V. It is designed with 3 output lines. There are 6 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. The high level output current is set to -1mA. The low level output current is set to 20mA. If the operating temperature is lower than 70°C, it is recommended. The operating temperature should be higher than 0°C. The system operates with a minimum supply voltage of 4.5V. It supports a maximum supply voltage of 5.5V volts. It is possible to obtain a frequency of 80MHz.
74F174SC Features
Tube package
74F series
16 pins
6 Bits
74F174SC Applications
There are a lot of ON Semiconductor 74F174SC Flip Flops applications.
- Set-reset capability
- Shift Registers
- Buffer registers
- Latch-up performance
- Circuit Design
- EMI reduction circuitry
- Storage registers
- Computing
- Guaranteed simultaneous switching noise level
- Patented noise
