74F191SJ
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Supplier Device Package | 16-SOP |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | 74F |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Voltage - Supply | 4.5V~5.5V |
| Base Part Number | 74F191 |
| Number of Elements | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 4 |
| Propagation Delay | 11 ns |
| Turn On Delay Time | 22 ns |
| Logic Function | Counter |
| Direction | Up, Down |
| Logic Type | Binary Counter |
| Number of Bits per Element | 4 |
| Trigger Type | Positive Edge |
| Sync/Async | Synchronous |
| Number of Input Lines | 4 |
| Number of Output Lines | 4 |
| Clock Edge Trigger Type | Positive Edge |
| Count Rate | 100MHz |
| Timing | Synchronous |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74F191SJ Overview
A 16-SOIC (0.209, 5.30mm Width)package is used for this device. The 1elements are connected by wires. As a result, it is packaged as Tube. In the circuit, 16pins are used to connect other components. The way of Surface Mount is used to mount it. As a member of 74F series, it is well suited for various applications. Binary Counteris used as the logic type. Setting the operating temperature to 0°C~70°C is recommended. This device is mounted in a Surface Mountmanner. As long as the supply voltage is set to [0], the device can operate with a greater degree of reliability. An array consists of 4bits for each element. There are 4bits of information contained in the device. You can find more related parts under its base part number of 74F191. Electrical characteristics are stable at temperature 70°Cfor extended periods of time. It operates within a specified temperature range, with the lower limit typically set at 0°C degrees Celsius. In this case, the maximum voltage available to the device is 5.5V. A minimum voltage of 4.5Vis available for the device. There are 4 input lines that allow binary data to be input in the form of an on/off signal. There are 4output lines on the device. As part of its normal operation, it has been designed with 1circuits.
74F191SJ Features
Embedded in the 16-SOIC (0.209, 5.30mm Width) package
4 bits per element
74F191SJ Applications
There are a lot of ON Semiconductor 74F191SJ Counters & Dividers applications.
- Communications Digital Frequency Synthesizers;
- Fixed and programmable divide-by-10,9,8,7,6,5,4,3,2 counters
- TRUE RMS-TO-DC CONVERSION
- Divide-by-N counting
- SQUARING
- MULTIPLICATION
- Dual Up Counters
- Frequency dividing circuits
- Divide-by"N" counters/frequency synthesizers
- Control counters
