74F257APC
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | 74F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Type | Multiplexer |
| Terminal Finish | MATTE TIN |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Circuit | 4 x 2:1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Family | F/FAST |
| Number of Inputs | 2 |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 3mA 24mA |
| Output Polarity | TRUE |
| Propagation Delay (tpd) | 6 ns |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height Seated (Max) | 5.08mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
74F257APC Overview
In order to conserve board space, digital switch is included in the 16-DIP (0.300, 7.62mm).It is packaged according to the Tube method.In terms of mounting, digital switch ic uses the Through Hole method .The analog IC in the multiplexers is identified as Multiplexer.In the case of 0°C~70°C, turn signal switch will not be affected by external factors.When digital controlled switch operates at 4.5V~5.5V, designers are provided with a greater degree of flexibility.As a member of 74F series, the multiplexers can be used for a wide range of applications.It is designed with 16 terminations as part of its basic configuration.The turn signal switch is supplied with a voltage of 5V volts.A component pin count of 16 is found on this turn signal switch.Among the family of F/FAST the logic switch is a member.To avoid unnecessary failures, keep the supply voltage at 4.5V (Vsup).Vsup (maximum supply voltage) should be kept as 5.5V to prevent unnecessary failures.This turn signal switch has 1 outputs designed for its operation.In this multiplexer, there is a total of 2 inputs.
74F257APC Features
Supplied in the 16-DIP (0.300, 7.62mm) package
74F257APC Applications
There are a lot of Rochester Electronics, LLC 74F257APC Signal Switches / Multiplexers / Decoders applications.
- Electronic circuits
- CNC machines
- Telephone network
- Automation system
- Home automation system
- Medical industry
- Code conversion
- Logic circuits
- Transmission from the computer system of a satellite
- Video transmission
