74F273SCX
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Supplier Device Package | 20-SOIC |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74F |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Voltage - Supply | 4.5V~5.5V |
| Frequency | 160MHz |
| Base Part Number | 74F273 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 8 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 8 |
| Clock Frequency | 160MHz |
| Propagation Delay | 9 ns |
| Turn On Delay Time | 7 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 44mA |
| Current - Output High, Low | 1mA 20mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 9ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| High Level Output Current | -1mA |
| Low Level Output Current | 20mA |
| Number of Input Lines | 8 |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74F273SCX Overview
It is packaged in the way of 20-SOIC (0.295, 7.50mm Width). Package Tape & Reel (TR)embeds it. In the configuration, Non-Invertedis used as the output. There is a trigger configured with Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. A voltage of 4.5V~5.5Vis used as the supply voltage. The operating temperature is 0°C~70°C TA. Logic flip flops of this type are classified as D-Type. It is a type of FPGA belonging to the 74F series. A frequency of 160MHzshould not be exceeded by its output. The element count is 1 . As a result, it consumes 44mA quiescent current. If you search by 74F273, you will find similar parts. There is an electronic part mounted in the way of Surface Mount. With its 20pins, it is designed to work with most electronic flip flops. This device's clock edge trigger type is Positive Edge. There are 8bits in its design. The superior flexibility of this product is achieved by using 8 circuits. For high efficiency, the supply voltage should be kept at 5V. There are 3 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. As of now, there are 8input lines. It is set to -1mAfor the high level output current. It is set to 20mAfor the low level output current. Operating temperatures should be lower than 70°C. A temperature above 0°Cshould be used for the operation. The RS flip flop is designed to operate with a minimal supply voltage of 4.5VV. It supports the maximal supply voltage of 5.5V. A frequency of 160MHzcan be achieved.
74F273SCX Features
Tape & Reel (TR) package
74F series
20 pins
8 Bits
74F273SCX Applications
There are a lot of ON Semiconductor 74F273SCX Flip Flops applications.
- Safety Clamp
- EMI reduction circuitry
- Latch-up performance
- Convert a momentary switch to a toggle switch
- 2 – Bit synchronous counter
- Shift registers
- Balanced Propagation Delays
- Consumer
- Computers
- Functionally equivalent to the MC10/100EL29
