74F373MSA
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Supplier Device Package | 20-SSOP |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | 74F |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Voltage - Supply | 4.5V~5.5V |
| Base Part Number | 74F373 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Number of Circuits | 8 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 55mA |
| Number of Bits | 8 |
| Propagation Delay | 7 ns |
| Turn On Delay Time | 5.3 ns |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 3mA 24mA |
| Logic Type | D-Type Transparent Latch |
| High Level Output Current | -3mA |
| Low Level Output Current | 3mA |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| Delay Time - Propagation | 5.3ns |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74F373MSA Overview
In the 20-SSOP (0.209, 5.30mm Width) package, it is embedded. Tube is the way it is packaged. It uses the output configuration Tri-State. This electrical device has a logic type of D-Type Transparent Latch. Surface Mount is used to mount this electronic part. There is no supply voltage for this device. There is a temperature of 0°C~70°C at which the system operates. An FPGA in this series belongs to the 74F family. The design of this electronic part contains 8 bits. 74F373 is its family. 20 pins are used in its design. This electronic part is mounted in the way of Surface Mount. Electronic circuits are represented by 8 input lines. A high efficiency supply voltage should be maintained at 5V. Input lines are converted into binary equivalents by 3 output lines. It consists of 1 elements. 8 circuits are used to provide this superior level of flexibility. 3mA is set as the low level output current. In the high level output current, the value is set to -3mA. Ideally, the operating temperature should be lower than 70°C. There should be a temperature above 0°C at which the device operates. The maximum supply voltage is 5.5V. In order for the machine to operate, the supply voltage must be 4.5V.
74F373MSA Features
20-SSOP (0.209, 5.30mm Width) package
74F series
8 Bits
74F373 family
20 pins
1 elements
74F373MSA Applications
There are a lot of ON Semiconductor 74F373MSA Latches applications.
- Pattern generators
- Motor Drives
- Buffer Storage
- Programmable binary
- Multi-line decoders
- Serial Output Data Queuing
- Parallel Input
- Relay
- Watches
- Digital bus buffer
