banner_page

74F373SC

D-Type, Latch 4.5V~5.5V 8 Bits Tri-State Latches 74F Series 74F373 20-SOIC (0.295, 7.50mm Width)


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-74F373SC
  • Package: 20-SOIC (0.295, 7.50mm Width)
  • Datasheet: PDF
  • Stock: 373
  • Description: D-Type, Latch 4.5V~5.5V 8 Bits Tri-State Latches 74F Series 74F373 20-SOIC (0.295, 7.50mm Width)(Kg)

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 20-SOIC (0.295, 7.50mm Width)
Number of Pins 20
Supplier Device Package 20-SOIC
Operating Temperature 0°C~70°C
Packaging Tube
Published 2000
Series 74F
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Max Operating Temperature 70°C
Min Operating Temperature 0°C
Voltage - Supply 4.5V~5.5V
Base Part Number 74F373
Output Type Tri-State
Operating Supply Voltage 5V
Number of Elements 1
Circuit 8:8
Polarity Non-Inverting
Number of Circuits 8
Max Supply Voltage 5.5V
Min Supply Voltage 4.5V
Nominal Supply Current 55mA
Output Current 24mA
Number of Bits 8
Propagation Delay 7 ns
Quiescent Current 38mA
Turn On Delay Time 5.3 ns
Logic Function D-Type, Latch
Current - Output High, Low 3mA 24mA
Logic Type D-Type Transparent Latch
Number of Gates 8
High Level Output Current -3mA
Low Level Output Current 3mA
Number of Input Lines 8
Independent Circuits 1
Number of Output Lines 3
Delay Time - Propagation 5.3ns
REACH SVHC No SVHC
RoHS Status Non-RoHS Compliant
Lead Free Lead Free

74F373SC Overview


In the 20-SOIC (0.295, 7.50mm Width) package, it is embedded. It is packaged in the way of Tube. In this configuration, the output is set to Tri-State. The Logic type of this electrical device is D-Type Transparent Latch. A Surface Mount mount is used for mounting this electronic part. In order for it to operate, it needs a supply voltage of 4.5V~5.5V. A temperature of 0°C~70°C is used for operation. This FPGA is part of the 74F series. It is designed with 8 bits. The family in which it belongs to is 74F373. The 20 pins are designed into it. Surface Mount is used to mount this electronic part. It contains 8 input lines where electronic circuits are present. With 24mA, maximum design flexibility is ensured. In order to achieve high efficiency, the supply voltage should be kept at 5V. There are 3 output lines that correspond to the binary equivalents of the input line. It consumes 38mA of quiescent current without being affected by external factors. There are 1 elements in it. To achieve its exceptional flexibility, it relies on 8 circuits. 3mA is set as the low level output current. It is set to zero for the high level output current. It is recommended that the operating temperature not exceed 70°C. There should be a temperature above 0°C at which the device operates. There is a maximum supply voltage of 5.5V supported by this device. It operates with the minimal supply voltage of 4.5V.

74F373SC Features


20-SOIC (0.295, 7.50mm Width) package
74F series
8 Bits
74F373 family
20 pins
1 elements

74F373SC Applications


There are a lot of ON Semiconductor 74F373SC Latches applications.

  • Storage
  • Digital bus buffer
  • Phase comparator
  • Display
  • Automotive Infotainment
  • Timers
  • Meter applications
  • OC-48 communication systems
  • Serial Output Data Queuing
  • Hammer

Write a review

Note: HTML is not translated!
    Bad           Good