74F373SCX
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Supplier Device Package | 20-SOIC |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Series | 74F |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Voltage - Supply | 4.5V~5.5V |
| Base Part Number | 74F373 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Number of Circuits | 8 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 55mA |
| Number of Bits | 8 |
| Propagation Delay | 7 ns |
| Turn On Delay Time | 5.3 ns |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 3mA 24mA |
| Logic Type | D-Type Transparent Latch |
| High Level Output Current | -3mA |
| Low Level Output Current | 3mA |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| Delay Time - Propagation | 5.3ns |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74F373SCX Overview
It is embedded in the 20-SOIC (0.295, 7.50mm Width) package. A package of Tape & Reel (TR) has been used. The output it is configured with uses Tri-State. The Logic type of this electrical device is D-Type Transparent Latch. A Surface Mount mount is used for mounting this electronic part. There is no supply voltage for this device. The operating temperature is 0°C~70°C. There are a number of FPGAs in this series, including this one. 8 Bits are used in the design of this electronic part. The family it belongs to is 74F373. 20 pins are used in its design. Surface Mount is used to mount this electronic part. It contains 8 input lines where electronic circuits are present. High efficiency requires maintaining the supply voltage at 5V. 3 output lines provide binary equivalents of input lines. A total of 1 elements make up this object. It achieves superior flexibility by using 8 circuits. The low level output current is set to 3mA. There is -3mA output current at the high level. Ideally, the temperature should not be higher than 70°C. In order for the system to operate properly, the operating temperature should be higher than 0°C. The supply voltage is limited to 5.5V. A minimal voltage of 4.5V is needed to operate it.
74F373SCX Features
20-SOIC (0.295, 7.50mm Width) package
74F series
8 Bits
74F373 family
20 pins
1 elements
74F373SCX Applications
There are a lot of ON Semiconductor 74F373SCX Latches applications.
- A/D and D/A conversion
- Automotive Cluster
- Display driver
- Storage
- Decade counting 7-segment decimal display
- General-Purpose Register
- Buffer/Storage Registers
- Hammer
- Parallel data synchronization
- PCs and Notebooks
