74F398PC
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | 74F |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | Multiplexer |
| Terminal Finish | TIN LEAD |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| JESD-30 Code | R-PDIP-T20 |
| Qualification Status | Not Qualified |
| Circuit | 4 x 2:1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Bits | 4 |
| Family | F/FAST |
| Current - Output High, Low | 1mA 20mA |
| Output Polarity | COMPLEMENTARY |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height Seated (Max) | 5.08mm |
| Length | 26.075mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
74F398PC Overview
Digital switch is provided in the 20-DIP (0.300, 7.62mm) for the purpose of saving board space.As a result, it is packaged in the way of Tube.In terms of mounting, digital switch ic uses the method of Through Hole.the multiplexers uses an analog IC Multiplexer.If the operating temperature is maintained at 0°C~70°C, turn signal switch will not be susceptible to external factors.With a supply voltage of 4.5V~5.5V, designers have greater flexibility of digital controlled switch.Multiplexers from the 74F series can be used in a wide range of applications.There are 20 terminations included in its basic configuration.The voltage supplied for multiplexer's system is 5V.multiplexer's systemThis turn signal switch contains 20 component pins.The logic switch is a member of the F/FAST family.Signal multiplexer consists of 4 bits.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 4.5V.It is advisable to keep the maximum supply voltage (Vsup) at 5.5V so as to avoid some unnecessary failures.
74F398PC Features
Supplied in the 20-DIP (0.300, 7.62mm) package
74F398PC Applications
There are a lot of Rochester Electronics, LLC 74F398PC Signal Switches / Multiplexers / Decoders applications.
- Computer memory
- Audio transmission
- Telephone network
- Implementing boolean functions with multiple variables
- RF-based home automation system
- Logic circuits
- Steel plants
- Medium scale TV wall
- Image transmission
- Data distribution
