banner_page

74F533PC

D-Type, Latch 4.5V~5.5V 8 Bits Tri-State Latches 74F Series 74F533 20-DIP (0.300, 7.62mm)


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-74F533PC
  • Package: 20-DIP (0.300, 7.62mm)
  • Datasheet: PDF
  • Stock: 727
  • Description: D-Type, Latch 4.5V~5.5V 8 Bits Tri-State Latches 74F Series 74F533 20-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Mount Through Hole
Mounting Type Through Hole
Package / Case 20-DIP (0.300, 7.62mm)
Number of Pins 20
Supplier Device Package 20-PDIP
Operating Temperature 0°C~70°C
Packaging Tube
Series 74F
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Max Operating Temperature 70°C
Min Operating Temperature 0°C
Voltage - Supply 4.5V~5.5V
Base Part Number 74F533
Output Type Tri-State
Operating Supply Voltage 5V
Number of Elements 1
Circuit 8:8
Polarity Inverting
Number of Circuits 8
Max Supply Voltage 5.5V
Min Supply Voltage 4.5V
Nominal Supply Current 61mA
Number of Bits 8
Propagation Delay 9 ns
Quiescent Current 41mA
Turn On Delay Time 6.7 ns
Logic Function D-Type, Latch
Current - Output High, Low 3mA 24mA
Logic Type D-Type Transparent Latch
High Level Output Current -3mA
Low Level Output Current 3mA
Number of Input Lines 2
Independent Circuits 1
Number of Output Lines 8
Delay Time - Propagation 6.7ns
RoHS Status RoHS Compliant
Lead Free Lead Free

74F533PC Overview


In the 20-DIP (0.300, 7.62mm) package, it can be found as an embedded module. Tube is the packaging method. Tri-State is the output configured for it. There is a logic type of D-Type Transparent Latch associated with this electrical device. According to Through Hole, this electronic part is mounted. It operates with a supply voltage of 4.5V~5.5V. A temperature of 0°C~70°C is set as the operating temperature. In the 74F series, this FPGA is located. The design of this electronic part is based on 8 bits. This type belongs to the 74F533 family. The device has 20 pins. The electronic part is mounted using the Through Hole method. It consists of 2 input lines from which an electronic circuit can be built. For maximum efficiency, the supply voltage should be set to 5V. A binary equivalent of the input line is generated by the 8 output lines. It consumes 41mA current from its quiescent state without being affected by external factors at all. A total of 1 elements make up this object. Its superior flexibility is achieved by using 8 circuits. 3mA represents the low level output current. It is set to zero for the high level output current. A temperature below 70°C should be used for operation. It is recommended that the operating temperature be higher than 0°C. Voltages up to 5.5V can be supplied. In order for the machine to operate, the supply voltage must be 4.5V.

74F533PC Features


20-DIP (0.300, 7.62mm) package
74F series
8 Bits
74F533 family
20 pins
1 elements

74F533PC Applications


There are a lot of ON Semiconductor 74F533PC Latches applications.

  • Watches
  • Buffer/Storage Registers
  • Decade counting
  • Audio and video switching
  • Synchronous frequency dividers
  • Parallel data storage
  • BCD counting
  • Timers
  • Counting
  • Phase comparator

Write a review

Note: HTML is not translated!
    Bad           Good