74F533SCX
| Parameters | |
|---|---|
| Polarity | Inverting |
| Number of Circuits | 8 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 61mA |
| Number of Bits | 8 |
| Propagation Delay | 9 ns |
| Turn On Delay Time | 6.7 ns |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 3mA 24mA |
| Logic Type | D-Type Transparent Latch |
| High Level Output Current | -3mA |
| Low Level Output Current | 3mA |
| Number of Input Lines | 2 |
| Independent Circuits | 1 |
| Number of Output Lines | 8 |
| Delay Time - Propagation | 6.7ns |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Supplier Device Package | 20-SOIC |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Series | 74F |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Voltage - Supply | 4.5V~5.5V |
| Base Part Number | 74F533 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Circuit | 8:8 |
74F533SCX Overview
In the package 20-SOIC (0.295, 7.50mm Width), it can be found. This package has the format of Tape & Reel (TR). It uses the output configuration Tri-State. This electrical device has a logic type of D-Type Transparent Latch. Based on the way of Surface Mount, this electronic part is mounted. It operates at a voltage of 4.5V~5.5V. It operates at 0°C~70°C degrees Celsius. The 74F series of FPGAs is the one this FPGA belongs to. The design of this electronic part is based on 8 bits. As a member of the 74F533 family, it falls under that category. It is designed with 20 pins. It is mounted according to the Surface Mount method. There are electronic circuits attached to the 2 input lines. The supply voltage should be maintained at 5V for high efficiency. Input lines are converted into binary equivalents by 8 output lines. This element consists of 1. 8 circuits are used to achieve superior flexibility. 3mA is set as the low level output current. There is -3mA high level output current set. The operating temperature should be lower than 70°C. The operating temperature should be higher than 0°C. There is a maximum voltage supply of 5.5V that can be applied to it. There is a minimum supply voltage of 4.5V for it.
74F533SCX Features
20-SOIC (0.295, 7.50mm Width) package
74F series
8 Bits
74F533 family
20 pins
1 elements
74F533SCX Applications
There are a lot of ON Semiconductor 74F533SCX Latches applications.
- Synchronous frequency dividers
- BCD counting
- Timers
- Decade counting
- Counting
- Hammer Device Information
- Storage
- Counters
- A/D converters
- Accumulator Registers
