74F533SJ
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Supplier Device Package | 20-SOP |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | 74F |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Voltage - Supply | 4.5V~5.5V |
| Base Part Number | 74F533 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Circuit | 8:8 |
| Polarity | Inverting |
| Number of Circuits | 8 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 61mA |
| Number of Bits | 8 |
| Propagation Delay | 9 ns |
| Turn On Delay Time | 6.7 ns |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 3mA 24mA |
| Logic Type | D-Type Transparent Latch |
| High Level Output Current | -3mA |
| Low Level Output Current | 3mA |
| Number of Input Lines | 2 |
| Independent Circuits | 1 |
| Number of Output Lines | 8 |
| Delay Time - Propagation | 6.7ns |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74F533SJ Overview
20-SOIC (0.209, 5.30mm Width) contains it. The package is in the form of Tube. In its configuration, Tri-State is used as the output. This electrical device has the logic type D-Type Transparent Latch. Surface Mount is used to mount this electronic part. It operates at a voltage of 4.5V~5.5V. It operates at 0°C~70°C degrees Celsius. The 74F series contains FPGAs of this type. With this electronic part, there are 8 bits. It belongs to 74F533 family. It is designed with 20 pins. It is mounted according to the Surface Mount method. It consists of 2 input lines from which an electronic circuit can be built. High efficiency requires a voltage supply of 5V. There are 8 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. There are 1 elements in it. 8 circuits are used to achieve superior flexibility. In the low level output current, the value is set to 3mA. -3mA represents the high level output current. Ideally, the operating temperature should be lower than 70°C. Temperatures above 0°C should be used. There is a maximum voltage of 5.5V supported. With a voltage of 4.5V, it operates at its minimum capacity.
74F533SJ Features
20-SOIC (0.209, 5.30mm Width) package
74F series
8 Bits
74F533 family
20 pins
1 elements
74F533SJ Applications
There are a lot of ON Semiconductor 74F533SJ Latches applications.
- Storage
- Avionics
- BCD counting
- Parallel Input
- Hammer Device Information
- Pattern generators
- Multi-line decoders
- Instrumentation
- Hammer
- Four-bit storage with output enable
