74F534SJX
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Supplier Device Package | 20-SOP |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74F |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Voltage - Supply | 4.5V~5.5V |
| Frequency | 100MHz |
| Base Part Number | 74F534 |
| Function | Standard |
| Output Type | Tri-State, Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Inverting |
| Number of Circuits | 8 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 8 |
| Clock Frequency | 100MHz |
| Propagation Delay | 8.5 ns |
| Turn On Delay Time | 6.5 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 86mA |
| Current - Output High, Low | 3mA 24mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 8.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| High Level Output Current | -3mA |
| Low Level Output Current | 24mA |
| Number of Input Lines | 1 |
| Number of Output Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74F534SJX Overview
It is embeded in 20-SOIC (0.209, 5.30mm Width) case. The Tape & Reel (TR)package contains it. In the configuration, Tri-State, Invertedis used as the output. JK flip flop uses Positive Edgeas the trigger. There is an electronic component mounted in the way of Surface Mount. With a supply voltage of 4.5V~5.5V volts, it operates. In this case, the operating temperature is 0°C~70°C TA. It belongs to the type D-Typeof flip flops. In this case, it is a type of FPGA belonging to the 74F series. In order for it to function properly, its output frequency should not exceed 100MHz. The element count is 1 . There is 86mA quiescent consumption. Members of the 74F534family make up this object. A part of the electronic system is mounted in the way of Surface Mount. This board is designed with 20pins on it. This device exhibits a clock edge trigger type of Positive Edge. This flip flop is designed with 8 Bits. The superior flexibility of this circuit is achieved by using 8 circuits. A high level of efficiency can be achieved by maintaining the supply voltage at 5V. There are 8 output lines on it. This input has 1lines in it. -3mA is set as the high level output current. 24mAis set as the low level output current. A temperature below 70°Cshould be used for operation. Ideally, the operating temperature should be higher than 0°C. Initially, it requires a voltage of 4.5V as the minimum supply voltage. 5.5Vis its maximum supply voltage. This frequency can be achieved at 100MHz.
74F534SJX Features
Tape & Reel (TR) package
74F series
20 pins
8 Bits
74F534SJX Applications
There are a lot of ON Semiconductor 74F534SJX Flip Flops applications.
- Frequency Divider circuits
- Individual Asynchronous Resets
- EMI reduction circuitry
- Balanced 24 mA output drivers
- Safety Clamp
- Data Synchronizers
- Guaranteed simultaneous switching noise level
- Balanced Propagation Delays
- Single Down Count-Control Line
- Latch
