74F564PC
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | MATTE TIN |
| Additional Feature | BROADSIDE VERSION OF 534 |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| JESD-30 Code | R-PDIP-T20 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Ports | 2 |
| Clock Frequency | 100MHz |
| Family | F/FAST |
| Current - Quiescent (Iq) | 86mA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 3mA 24mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 8.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Length | 26.075mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
74F564PC Overview
20-DIP (0.300, 7.62mm)is the packaging method. There is an embedded version in the package Tube. This output is configured with Tri-State, Non-Inverted. It is configured with the trigger Positive Edge. Through Holeis positioned in the way of this electronic part. It operates with a supply voltage of 4.5V~5.5V. Currently, the operating temperature is 0°C~70°C TA. It belongs to the type D-Typeof flip flops. It is a type of FPGA belonging to the 74F series. Its output frequency should not exceed 100MHz Hz. The list contains 1 elements. It consumes 86mA of quiescent 20terminations have occurred. An input voltage of 5Vpowers the D latch. An electronic device belonging to the family F/FASTcan be found here. 5.5Vis the maximum supply voltage (Vsup). For normal operation, the supply voltage (Vsup) should be kept above 4.5V. This flip flop has a total of 2ports. As an additional reference, you may refer to electronic flip flop BROADSIDE VERSION OF 534.
74F564PC Features
Tube package
74F series
74F564PC Applications
There are a lot of Rochester Electronics, LLC 74F564PC Flip Flops applications.
- Parallel data storage
- EMI reduction circuitry
- Buffer registers
- Synchronous counter
- Balanced Propagation Delays
- Computing
- Latch-up performance
- Counters
- ATE
- High Performance Logic for test systems
