74F574SC
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74F |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Voltage - Supply | 4.5V~5.5V |
| Base Part Number | 74F574 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Clock Frequency | 100MHz |
| Current - Quiescent (Iq) | 86mA |
| Current - Output High, Low | 3mA 24mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 8.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
74F574SC Overview
It is packaged in the way of 20-SOIC (0.295, 7.50mm Width). There is an embedded version in the package Tube. The output it is configured with uses Tri-State, Non-Inverted. This trigger is configured to use Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. A supply voltage of 4.5V~5.5V is required for operation. The operating temperature is 0°C~70°C TA. This logic flip flop is classified as type D-Type. In terms of FPGAs, it belongs to the 74F series. There should be no greater frequency than 100MHzon its output. In total, there are 1 elements. As a result, it consumes 86mA of quiescent current without being affected by external factors. JK flip flop belongs to 74F574 family.
74F574SC Features
Tube package
74F series
74F574SC Applications
There are a lot of ON Semiconductor 74F574SC Flip Flops applications.
- Safety Clamp
- ESCC
- Computing
- Data transfer
- Buffer registers
- Functionally equivalent to the MC10/100EL29
- Test & Measurement
- Matched Rise and Fall
- Buffered Clock
- Synchronous counter
