74F74SC
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Supplier Device Package | 14-SOIC |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2000 |
| Series | 74F |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | SMD/SMT |
| Type | D-Type |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Voltage - Supply | 4.5V~5.5V |
| Frequency | 125MHz |
| Base Part Number | 74F74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Voltage | 5V |
| Number of Circuits | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Output Current | 20mA |
| Number of Bits | 2 |
| Clock Frequency | 125MHz |
| Propagation Delay | 10.5 ns |
| Turn On Delay Time | 5.3 ns |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 16mA |
| Current - Output High, Low | 1mA 20mA |
| Number of Bits per Element | 1 |
| Max Frequency | 100MHz |
| Max Propagation Delay @ V, Max CL | 6.8ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| High Level Output Current | -1mA |
| Low Level Output Current | 20mA |
| Number of Input Lines | 4 |
| Number of Output Lines | 2 |
| Clock Edge Trigger Type | Positive Edge |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74F74SC Overview
The flip flop is packaged in a case of 14-SOIC (0.154, 3.90mm Width). D flip flop is included in the Tubepackage. T flip flop uses Differentialas its output configuration. It is configured with a trigger that uses a value of Positive Edge. This electronic part is mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 4.5V~5.5V. In the operating environment, the temperature is 0°C~70°C TA. A flip flop of this type is classified as a D-Type. In FPGA terms, D flip flop is a type of 74Fseries FPGA. A frequency of 125MHzshould not be exceeded by its output. The element count is 2 . There is a consumption of 16mAof quiescent energy. The 74F74 family contains it. There is an electronic part mounted in the way of Surface Mount. With its 14pins, it is designed to work with most electronic flip flops. It has a clock edge trigger type of Positive Edge. It is designed with a number of bits of 2. In order to achieve its superior flexibility, 2 circuits are used. If high efficiency is desired, the supply voltage should be kept at 5V. With a current output of 20mA , it offers maximum design flexibility. There are 2 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. This input has 4lines in it. In this case, the high level output current is set to -1mA. A 20mAvalue is set for low-level output current. The operating temperature should be lower than 70°C. It should be higher than 0°Cwhen the system is operating. Despite its minimal supply voltage of 4.5V, it is capable of operating. It is capable of supporting a maximum supply voltage of 5.5V. This frequency can be achieved 125MHz.
74F74SC Features
Tube package
74F series
14 pins
2 Bits
74F74SC Applications
There are a lot of ON Semiconductor 74F74SC Flip Flops applications.
- Storage registers
- Frequency division
- Event Detectors
- Safety Clamp
- Computing
- 2 – Bit synchronous counter
- ESD protection
- Frequency Dividers
- Load Control
- ATE
